Larry Problem in (main) EEPROM, turn service menu up and copy all informations from old one, replace with new EEPROM. There are two EEPROM IC's in this model. Secondary EEPROM for CONVERTGEN, but problem in the main one cause by loosing grounds in main board.HTH Don B. Dr. VCR est:1994 20 Hanson Ave Kitchener, Ontario CANADA N2C 2E2 Tel 519-579-7112 Fax 519-579-1996 drvcr@xxxxxxxxxx ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/