No schematic. This set came in with no video. HV and audio are fine. CRT filaments are lit. No G2 voltage, I do have 140x3 on CRT pins, but no other voltages. B+ is 135.8 I am leaning towards the vertical IC. I have 26.7 on 2; 27.5 on 3 and 13.3 on pin 5. It is a LA78041 I suspect the vertical IC because the heatsink for the HOT(2SD2499)/vertical IC gets really hot after a few minutes. I verified the vertical chip was running hot by cooling it down and placing fingers on both components and the vertical IC roasted first. I also checked the HOT which seemed fine..has an internal diode that tested. I increased the G2 and still no raster. Has anyone no this IC to cause no video, before I order one? Thank you. Jeff Dougherty Intrepid Video TV/VCR 263 S Front St Steelton PA 17113 ph..717-939-7708 fax...717-564-4952 www.intrepid-video.com www.tech-repair.net ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/