When you changed the fluid,were the Pix tube Lens replaced properly ??? I seem to remember 2 lens in one direction,the 3rd in the other direction. BTW,are all 3 tubes out of focus ??? Could you have a Screen(Lenticuar/Fresnel) problem ??? Peggs At 10:15 PM 11/26/02 -0500, you wrote: > >This set is going to be the death of me!!! > >I have checked Lens focus and electrical focus to the best picture. It seems >like I need to turn electrical focus 1/4 turn more clockwise and picture >would be great. I dont have a HV probe (anymore) but I will borrow one from >another shop if need be. > >Are these blocks notorious for this?? Heat transfer fluid was replaced 2 >weeks ago. > >Eric Haskins >Eric Haskins Consulting >727-449-1936 > >------------------------------------------ >To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html >To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html >------------------------------------------ >***NEW*** Tips Added Instantly!!!*** >Submit Repair Tips here: >http://www.tech-assist.org/secure/tip/ > Peggs' Electronics 1519 West 2nd Street Owensboro,KY 42301 270-926-4968 fax 270-686-7399 ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/