[TechAssist] Re: MITSUBISHI PROJ TV MDL: VS-5051 / NO VIDEO
- From: "Gooseman" <tvman99@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 11 Dec 2002 20:20:06 -0600
Look at ic401 for loose connection or the yokes.you can wiggle the youe
plugs and usually find the 1 with the loose connection.
Beyond that you may have a bad vertical IC.
Tvman99@xxxxxxx
-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of fremur01@xxxxxxxxx
Sent: Wednesday, December 11, 2002 4:36 PM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] MITSUBISHI PROJ TV MDL: VS-5051 / NO VIDEO
Hello,
Went on a call today for the following: Set has good
audio but no picture. I noticed all CRT filaments
light up along with H/V buildup. One Tech had
mentioned that some of these sets can have problems
with the PIP module.
Anyway, I was limited as to what could be done on
site, and will take set back to shop later this week.
I dont have service literature for this one. Nothing
looked burnt on the PIP module. Anyone know of case
history info for this model?
Thanks
Fred
MTS Electronics
Fayetteville, NC
fremur01@xxxxxxxxx
Item specs: MITSUBISHI PROJ TV MDL: VS-5051
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
