[TechAssist] Re: Hitachi Projo Model 50UX23KA \ Dead

  • From: ACME Enterprises <techassist@xxxxxxxxxxxxxx>
  • To: techassist@xxxxxxxxxxxxx
  • Date: Wed, 13 Apr 2005 12:55:32 -0400

Hi Armando --

The datasheet is on its way in a seperate email.

Regards,

Glen Goodwin
ACME Enterprises of Orlando
http://www.acme-sales.net
1-800-575-9833
1-407-296-2333


armando guerra wrote:
> This tv when powered on, relay clicks once but thats all. No print on
> this model.The led D903 stays red.No blinkling.No other leds lite up.I
> think that the power regulator may be bad but I don't have the print to
> check the voltages.It uses a STRM6511.Can someone give me the voltages
> on this reg.so that I can check to see if its putting out what it is
> suppose to.Its been a while but if I remember correctly,pin 5 should
> read between 10 and 16v if the reg is ok but not sure.Thanks for your
> help.
> Mando
> Birdie's TV & Electronics
> Casa  Grande, AZ
> 
> -----------------------------------------------------------------------------
> This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
> Lost Password: http://www.tech-assist.org  and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
> 
> 
> 
> 
-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Lost Password: http://www.tech-assist.org  and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/

Other related posts: