Model MS2580RDA, Q551(2SD1556) shorted, R518(5.6 ohm 7w) open, C435(1uf/160v) open, replaced defective parts, resoldered defective connections. Q551 gets hot after 5 min, with slight pulling in on right side, would short if left on. Flyback and Yoke sweep good and run cool. In Sams 2643-1 Any ideas as to cause of excess heat and pulling would be appreciated. Paul W C&W Electronics Azle Texas ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html