From WINSTIPS: --------------------------------------------------------------- Text pasted from WinSTIPS 2.0 http://www.ServiceSoftware.com --------------------------------------------------------------- EMERSON MS2580RDA Dead - Click Only No Snd Or Picture Bryn Mawr Tv R502 (1.8 Ohm 7watt) R518 (5.6 Ohm 7watt) Q401 2sd1556 C435 1uf/160v --------------------------------------------------------------- EMERSON MS2580RDA Dead Set Ms2580rda Sams:2643-1 Q401 Horz Output Transistor --------------------------------------------------------------- EMERSON MS2580RDA Dead. Ford'S Tv & Video Service Shorted Hot, Q401 (2sd1555), And Open Resistor, R518 (4.7 Ohm 5 W). --------------------------------------------------------------- EMERSON MS2580RDA H.o.t. runs hot after replacement, even with new h driver electrolytic Phil Bader Jan Phyl Tv Obtain an ORIGINAL H.o.t. 2sd1556 from Emerson and it runs cooler. Still may be necessary to attach an additional heat sink. (original emerson hot was Toshiba brand- avail from B&D) --------------------------------------------------------------- EMERSON MS2580RDA H.o.t. runs hot after replacement.. Russ White suretech@xxxxxxxx Besides bolting on an additional heatsink, i usually change the resistor from the base of horiz output from a 1k-1/4w to a 330-1/4w --------------------------------------------------------------- EMERSON MS2580RDA Horiz Output Repeat Failure, Heatsink Too Hot Q402 2sc2621, C444 .012/2kv, C445.0012/2kv, C437560pf/2kv, C435 1/160, Q401 2sd1556 H.O.T. Must use Toshiba brand h.o.t. avail from B&D a china brand will work if larger heatsink added to h.o.t. heatsink. --------------------------------------------------------------- EMERSON MS2580RDA Horizontal Output Transistor Repeat Failure. Ford'S Tv & Video Service Loose Connection On 125v Input Pin Of Flyback. --------------------------------------------------------------- EMERSON MS2580RDA Hot Overheats Greg Boyd C401 & C408: 3.3 Ufd @ 50v ( I Used 10 Ufd ) C405: 47 Ufd @ 16v --------------------------------------------------------------- EMERSON MS2580RDA Hv Shutdown, Immediate A Helper Elect C452 100/160, Also Replace C435 1/160 --------------------------------------------------------------- EMERSON MS2580RDA Pix & Sound Inop. Ticking, Buzz From Cgs Elect 25v Line Measures 10v. Ic401 Shorted. Upc1398h Vert Output --------------------------------------------------------------- EMERSON MS2580RDA Pix And Sound Inop. Relay Clicks Randy Evans C435 1/160, C452 100/160, Resolder R403, R436, R439, R441, R445, R446, R505, R506 --------------------------------------------------------------- EMERSON MS2580RDA Shorting Of Horizontal Output Transistor, Transistor Runs Hot Ms2580rda Sams:2643-1 T401 Horz Driver Transformer --------------------------------------------------------------- EMERSON MS2580RDA Shutdown (Int) With Clicking B&W Elect Solder Bad At Cf401 503 Khz Xtal. Off Ic201-62 --------------------------------------------------------------- EMERSON MS2580RDA Ticking, No Sound or Pix Georges Tv & Vcr Ser Phx Az Q401 2sd1556,Sub Bu2508df (10a), C435 R518 1/160v, R518 5.6 Ohm 7w Also Chk Connections On Dr Transformer. --------------------------------------------------------------- EMERSON MS2580RDA Ticking, Nsnp Q401 2sd1556, R518 5.6 Ohm 10w --------------------------------------------------------------- EMERSON MS2580RDA Ticking,Intermittent Shut Down Earls Tv Naperville Il Resolder All Connections On Horiz Flyback Also Check For Bad Solder On Associated Power Resistors In Horz Area Connections On Vert Cent Pot Were Bad --------------------------------------------------------------- Bob Waterman, CET® #RI-28 Master Technician License #9109 Service Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxxxxxxx geminitv@xxxxxxx ----- Original Message ----- From: "C&W Electronics" <c_w_electronics@xxxxxxxxxxx> To: "Tech Assist" <techassist@xxxxxxxxxxxxx> Sent: Wednesday, January 15, 2003 10:42 PM Subject: [TechAssist] Emerson HOT running hot & shorting. > Model MS2580RDA, Q551(2SD1556) shorted, R518(5.6 ohm 7w) open, C435(1uf/160v) open, replaced defective parts, resoldered defective connections. > > Q551 gets hot after 5 min, with slight pulling in on right side, would short if left on. Flyback and Yoke sweep good and run cool. In Sams 2643-1 > > Any ideas as to cause of excess heat and pulling would be appreciated. > > Paul W > C&W Electronics > Azle Texas > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html