[Name????????????] If you wiggle the FBT, the problem has to be solder or crack in the board. Hold a really bright bulb to the component side of the board as you look on the trace side. This may help you to find a broken solder trace. Also, use a magnifier to check for solder splashes. Jeff Intrepid Video & Electronics 501 Luther Rd Harrisburg PA 17111 (FAX)1-717-564-4952 www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com www.9-11-2001tragedy.com mailto:jeff@xxxxxxxxxxxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of javiles929@xxxxxxx Sent: Sunday, January 20, 2002 3:03 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Dead set Set came in dead and fuse blown. I check the HOT and it was shorted so i replace it and CP17 that was overstressed. Turn set on and it works so i let set warm up and see for any possible changes but nothing, set was working fine. So i replace back cover and try set again but this time set did`nt turn on. Remove back cover and wiggle the flyback and set went back on so i resolder all of the flyback pins and a few other cold solder. Set came back on so i replace back cover and same thing. Can anybody tell what i have miss to check. There are no cracks on board. Need help. GE # 13gp10 Tx825td chassis God Bless you all Aviles Computer & TV Repairs Bronx, NY 10452 Fax # 718-681-3117 ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above. ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.