Set came in dead and fuse blown. I check the HOT and it was shorted so i replace it and CP17 that was overstressed. Turn set on and it works so i let set warm up and see for any possible changes but nothing, set was working fine. So i replace back cover and try set again but this time set did`nt turn on. Remove back cover and wiggle the flyback and set went back on so i resolder all of the flyback pins and a few other cold solder. Set came back on so i replace back cover and same thing. Can anybody tell what i have miss to check. There are no cracks on board. Need help. GE # 13gp10 Tx825td chassis God Bless you all Aviles Computer & TV Repairs Bronx, NY 10452 Fax # 718-681-3117 ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.