[TechAssist] Re: CTC203 won't start and click
- From: "Jeff Dougherty" <support@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 17 Jan 2003 22:38:17 -0500
Pete,
First thing you should do is Repair Connections At L14401 At Base Of Horz Output
Transistor. It is best to remove this part, clean the leads and resolder.
support@xxxxxxxxxxxxxxxxxx
FAX 717-564-4952
Jeff Dougherty
Intrepid Video & Electronics Be careful of your thoughts.
501 Luther Rd They may become your words
Harrisburg, PA 17111 any moment.
717-909-8844
VCR tips, electronics info & general interest.
www.intrepid-video.com www.tech-repair.net
www.thetoolcaddy.com www.9-11-2001tragedy.com
***********************************************************************
----- Original Message -----
From: "Pete" <wpt19@xxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, January 17, 2003 8:40 AM
Subject: [TechAssist] CTC203 won't start and click
3 times
This set, when you push power try to start, but it won't, then makes 3
clicks on the degauss rely. The B+ current to the fly rise to 1.5 amps
then B+ voltage drop to 20V and start clicking. Replaced fly back,yoke,
HOT,ringing caps and diodes,
and pin amp transistor with no results.
Any help please will be very appreciated,
Thanks in advance.
Pete
Perdomo Tv Inc.
Miami, Fla.
wpt19@xxxxxxxxx
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
