check retrace caps c4401, c4402 and c4403 c4401 may be bulged on sides Robert tvservice@xxxxxxxxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "roger birmingham" <rogerselectronics@xxxxxxxxx> To: <Techassist@xxxxxxxxxxxxx> Sent: Thursday, November 07, 2002 11:03 AM Subject: [TechAssist] CTC177AM2(Will not turn on unless unplug yoke) > > Have replaced regulator IC. > > and horizontal output. > > With horiz. yoke connected will not turn on. > > unplug yoke and get high voltage(low) but has a line straight up and down . > > no deflection. > > Possible yoke? > > Or other problem. > > Thanks for any help. > > Roger... > > > Rogers ELectronics > 1225 Birmingham Road > Sulligent, Alabama 35586 > 1-205-698-8047 > > > --------------------------------- > Do you Yahoo!? > U2 on LAUNCH - Exclusive medley & videos from Greatest Hits CD > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/