RCA hotel set, CTC176K2 chassis. Hi fellow techs, Set came in dead. Set tweaks as it is plugged in indicating the horizontal frequency is working. Repaired tuner grounds, replaced shorted IR sensor?something sticky was poured on circuit board on front of circuit board where the control buttons are, cleaned up. Replaced eeprom and microprocessor from working chassis. Still dead. Replaced eeprom with test eeprom that is from a different chassis. Set comes on as soon as set is plugged in but pwr, volume down and menu buttons do not work, channel up and down activate menu and change channels every 5th push, volume up button activates menu and sometimes OSD for parameter setup: P00 V00. Removed test eeprom while set is running and reinstalled original eeprom and now set comes on by itself as with test eeprom. By the way, voltage to eeprom at pins 5,6 and 8 is 5 volts. HELP!!!!!!!! Kevin Wilks Kevin's TV & Video Repair Penticton BC Canada kevintv@xxxxxxx ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html