Surface mount chip jumper JC403 is at coordinates K/L 11 and JC411 is at coordinates J/K15/16. They are very small so look carefully. Bob Waterman, CET® #RI-28 Master Technician License #9109 Service Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxxxxxxx geminitv@xxxxxxx ----- Original Message ----- From: "Kevin" <kevintv@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, January 10, 2003 2:24 AM Subject: [TechAssist] Re: CTC176K2 20" hotel set, weird! > > I can't find JC403 or JC411. Can you give me some reference points? > Was your set dead as well? TIA > > Kevin Wilks > Kevin's TV & Video Repair > Penticton BC Canada > kevintv@xxxxxxx > > > -----Original Message----- > From: techassist-bounce@xxxxxxxxxxxxx > [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Webster TV > Sent: Thursday, January 09, 2003 1:09 PM > To: techassist@xxxxxxxxxxxxx > Subject: [TechAssist] Re: CTC176K2 20" hotel set, weird! > > > Kevin, > > Check for open trace between JC403 & JC411, had this happen once in a > CTC176, and it caused numerous different symptoms, including the ones > you > mentioned. I found the tip in a EUROS book on RCA tips. I spent hours on > this set and was about to give up, when I came across the tip. Jumper > with a > piece of wire to solve. > > Dan Webster > Webster's TV > Shullsburg, Wi. > ----- Original Message ----- > From: Kevin <kevintv@xxxxxxx> > To: TECH-ASSIST <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, January 08, 2003 3:08 AM > Subject: [TechAssist] CTC176K2 20" hotel set, weird! > > > > RCA hotel set, CTC176K2 chassis. > > > > Hi fellow techs, > > > > Set came in dead. Set tweaks as it is plugged in indicating the > > horizontal frequency is working. Repaired tuner grounds, replaced > > shorted IR sensor-something sticky was poured on circuit board on > front > > of circuit board where the control buttons are, cleaned up. Replaced > > eeprom and microprocessor from working chassis. Still dead. Replaced > > eeprom with test eeprom that is from a different chassis. Set comes > on > > as soon as set is plugged in but pwr, volume down and menu buttons do > > not work, channel up and down activate menu and change channels every > > 5th push, volume up button activates menu and sometimes OSD for > > parameter setup: P00 V00. Removed test eeprom while set > is > > running and reinstalled original eeprom and now set comes on by itself > > as with test eeprom. By the way, voltage to eeprom at pins 5,6 and 8 > is > > 5 volts. HELP!!!!!!!! > > > > Kevin Wilks > > Kevin's TV & Video Repair > > Penticton BC Canada > > kevintv@xxxxxxx > > > > > > ------------------------------------------ > > Submit A Repair Tip For Everyone Here: > > http://www.tech-assist.org/secure/tip/main.html > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > To CHANGE your email address, click here: > > http://www.techassist.net/forms/change.html > > > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html