The one I have now is from Art Shell and it is an analog capohm 1000 cap checker and it seems okay to me. I wonder if it is as I do catch a lot of bad caps with it. As with everything else..... it is a matter of knowing your test equipment and how it responds to the components being tested. Bill ----- Original Message ----- From: "Tel-Tek Electronics" <teltek@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, October 17, 2001 3:22 PM Subject: [TechAssist] Re: A question for ESR meter users > > Bill. > I would suggest the Dick Smith, in the Kit form. > Takes about 2 hours to assemble it. Works great, and like any piece of test > equipment, you get to know it's capabilities, and get a feel for it, in a > very short time. > If you have a large shop, get a couple. > Not familiar with the Capanalyzer, but seems a little pricey > > -Ed- > > teltek@xxxxxxxxxxx > > Tel-Tek Electronics > Midland > Ontario. > Canada > ----- Original Message ----- > From: "Barry Appleby" <burintv@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, October 17, 2001 12:01 PM > Subject: [TechAssist] Re: A question for ESR meter users > > > > > > Bill . I paid $179.00 US for the capanalyzer 88 from Electronic Design > > Specialists . The Dick Smith I purchased from Anatek for I think around > > $50.00 US but I'm not right sure as it's been some time ago . It was in > kit > > form as the assembled unit was more . Both units have worked great for me > . > > > > > > >From: "Bill S" <billans@xxxxxxxxxxxx> > > >Reply-To: techassist@xxxxxxxxxxxxx > > >To: <techassist@xxxxxxxxxxxxx> > > >Subject: [TechAssist] Re: A question for ESR meter users > > >Date: Wed, 17 Oct 2001 14:24:24 -0700 > > > > > > > > >How much is it and where can one get that unit? > > >Thanks > > >Bill > > >----- Original Message ----- > > >From: "Barry Appleby" <burintv@xxxxxxxxxxx> > > >To: <techassist@xxxxxxxxxxxxx> > > >Sent: Tuesday, October 16, 2001 7:14 PM > > >Subject: [TechAssist] Re: A question for ESR meter users > > > > > > > > > > > > > > [esr meters]. I have been fooled by a > shorted > > >cap > > > > when using the dick smith but never when using the capanalyzer 88 . It > > > > discharges the cap and checks for short before it checks esr . It has > a > > >DCR > > > > ohms adjust to tell how many ohms the shorted cap has . I don't fancy > > >it's > > > > flashing leds but have learned to live with it . > > > > Barry Appleby . > > > > > > > > > > > > >From: "Jeff Dougherty" <jeff@xxxxxxxxxxxxxxxxxx> > > > > >Reply-To: techassist@xxxxxxxxxxxxx > > > > >To: <techassist@xxxxxxxxxxxxx> > > > > >Subject: [TechAssist] Re: A question for ESR meter users > > > > >Date: Tue, 16 Oct 2001 16:27:47 -0400 > > > > > > > > > > > > > > >Duh......the DC through me off. > > > > > > > > > >Jeff www.9-11-2001tragedy.com > > > > >Help those affected by the NY/PA tragedy: > > > > >The Red Cross needs is mobilizing a national blood drive and needs > your > > > > >help. Please call 800-GIVE LIFE, to find out where in your area you > can > > > > >donate blood. > > > > >FAX 1-413-280-0677 > > > > >Intrepid Video & Electronics > > > > >Harrisburg, PA 17111 > > > > >717-909-8844 > > > > >www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com > > > > > > > > > > > > > > >----- Original Message ----- > > > > >From: "Jim Myers" <jr.myers@xxxxxxxxxxx> > > > > >To: <techassist@xxxxxxxxxxxxx> > > > > >Sent: Tuesday, October 16, 2001 11:21 AM > > > > >Subject: [TechAssist] Re: A question for ESR meter users > > > > > > > > > > > > > > > > > > > > > > Duh.........try an ohm meter. > > > > > > Jim Myers > > > > > > jr.myers@xxxxxxxxxxx > > > > > > ----- Original Message ----- > > > > > > From: "Jeff Dougherty" <jeff@xxxxxxxxxxxxxxxxxx> > > > > > > To: <techassist@xxxxxxxxxxxxx> > > > > > > Sent: Monday, October 15, 2001 10:52 PM > > > > > > Subject: [TechAssist] Re: A question for ESR meter users > > > > > > > > > > > > > > > > > > > > > > > > > > DC-resistance is a new one. > > > > > > > Can you explain how you test for this, Jim? > > > > > > > Thank you. > > > > > > > > > > > > > > Jeff www.9-11-2001tragedy.com > > > > > > > Help those affected by the NY/PA tragedy: > > > > > > > The Red Cross needs is mobilizing a national blood drive and > needs > > > > >your > > > > > > > help. Please call 800-GIVE LIFE, to find out where in your area > > >you > > > > >can > > > > > > > donate blood. > > > > > > > FAX 1-413-280-0677 > > > > > > > Intrepid Video & Electronics > > > > > > > Harrisburg, PA 17111 > > > > > > > 717-909-8844 > > > > > > > www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com > > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > From: "Jim Myers" <jr.myers@xxxxxxxxxxx> > > > > > > > To: <techassist@xxxxxxxxxxxxx> > > > > > > > Sent: Monday, October 15, 2001 4:37 PM > > > > > > > Subject: [TechAssist] Re: A question for ESR meter users > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > An ESR meter does not check capacitance, you'll find that a > lot > > >of > > > > > > > > capacitors that have a high esr reading will check good on a > > > > >capacitance > > > > > > > > tester. Also look out for a shorted, dc resistance, cap. ESR > > >meter > > > > >may > > > > > > > show > > > > > > > > it as good. If a cap checks good for ESR, dc resistance and > > > > >capacitance > > > > > > it > > > > > > > > is probably good, if it fails any of the three test it is bad. > > >If > > >it > > > > > > > passes > > > > > > > > all three test and replacement fixes a problem it is still > bad. > > > > > > > > Jim Myers > > > > > > > > jr.myers@xxxxxxxxxxx > > > > > > > > ----- Original Message ----- > > > > > > > > From: <Tvcr9@xxxxxxx> > > > > > > > > To: <techassist@xxxxxxxxxxxxx> > > > > > > > > Sent: Monday, October 15, 2001 3:08 PM > > > > > > > > Subject: [TechAssist] A question for ESR meter users > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I have found that the ESR meter can not detect a leaky or > > >lower > > > > >than > > > > > > > > normal > > > > > > > > > capacitors, i.e. it will show a good ESR reading but if the > > > > >capacitor > > > > > > > is > > > > > > > > > checked with a regular capacity meter it will be low in > value > > > > > > > > > Has anyone experienced this also ? > > > > > > > > > > > > > > > > > > Bill > > > > > > > > > > > > > > > > > > > > > > > > > > > Help make your TechAssist online repair tips > > > > > > > > > database better! Submit your fixes here: > > > > > > > > > http://www.circuitwork.com/techassist/tip/#tips > > > > > > > > > To unsubscribe write to: > > > > > > > > > techassist-request@xxxxxxxxxxxxx > > > > > > > > > with unsubscribe in the subject line. > > > > > > > > > > > > > > > > Help make your TechAssist online repair tips > > > > > > > > database better! Submit your fixes here: > > > > > > > > http://www.circuitwork.com/techassist/tip/#tips > > > > > > > > To unsubscribe write to: > > > > > > > > techassist-request@xxxxxxxxxxxxx > > > > > > > > with unsubscribe in the subject line. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Help make your TechAssist online repair tips > > > > > > > database better! Submit your fixes here: > > > > > > > http://www.circuitwork.com/techassist/tip/#tips > > > > > > > To unsubscribe write to: > > > > > > > techassist-request@xxxxxxxxxxxxx > > > > > > > with unsubscribe in the subject line. > > > > > > > > > > > > Help make your TechAssist online repair tips > > > > > > database better! Submit your fixes here: > > > > > > http://www.circuitwork.com/techassist/tip/#tips > > > > > > To unsubscribe write to: > > > > > > techassist-request@xxxxxxxxxxxxx > > > > > > with unsubscribe in the subject line. > > > > > > > > > > > > > > > > > > > > > >Help make your TechAssist online repair tips > > > > >database better! Submit your fixes here: > > > > >http://www.circuitwork.com/techassist/tip/#tips > > > > >To unsubscribe write to: > > > > >techassist-request@xxxxxxxxxxxxx > > > > >with unsubscribe in the subject line. > > > > > > > > > > > > _________________________________________________________________ > > > > Get your FREE download of MSN Explorer at > > >http://explorer.msn.com/intl.asp > > > > > > > > Help make your TechAssist online repair tips > > > > database better! Submit your fixes here: > > > > http://www.circuitwork.com/techassist/tip/#tips > > > > To unsubscribe write to: > > > > techassist-request@xxxxxxxxxxxxx > > > > with unsubscribe in the subject line. > > > > > >Help make your TechAssist online repair tips > > >database better! Submit your fixes here: > > >http://www.circuitwork.com/techassist/tip/#tips > > >To unsubscribe write to: > > >techassist-request@xxxxxxxxxxxxx > > >with unsubscribe in the subject line. > > > > > > _________________________________________________________________ > > Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.