I think the two wheel bus would have more ground clearance? Sent via BlackBerry from T-Mobile -----Original Message----- From: singlecabboy <sealingwaxred@xxxxxxxxxxxxx> Date: Tue, 8 May 2007 17:09:48 To:tcb@xxxxxxxxxxxxx Subject: [tcb] Re: steering box rebuild Brian ... that raised bus would come in handy --- evilscientistboo@xxxxxxxxxxxxx wrote: > It could be the center pin as well. > I would r&r the box with a rebuilt unit from > wolfgang or bus boys. The big issue is getting it > high enough or over a pit because the steering shaft > comes out with the box. > > Sent via BlackBerry from T-Mobile > > -----Original Message----- > From: "Brian Denning" <i_am_cool_fred@xxxxxxxxxxx> > Date: Tue, 08 May 2007 18:39:23 > To:tcb@xxxxxxxxxxxxx > Subject: [tcb] steering box rebuild > > well i have begun the final welding on the inner > lower front panel and the > sterring box will probably have to be removed > inorder to do a few minor > touchups with the por 15, under coating, and the > welder. I have decided that > while i have it out i ought to think about a > rebuild. > > i have a new drag link, new tie rod ends everywhere > but still have play in > the steering wheel the final conclusion that i can > draw from this is the > steering box. what should i look for in doing this? > how difficult could this > be? should i be able to get needed parts at the > local classic vw supply > shop? > > _________________________________________________________________ > Make every IM count. Download Messenger and join the > i’m Initiative now. > It’s free. > http://im.live.com/messenger/im/home/?source=TAGHM_MAY07 > > > Paul Smith www.23window.com/thezone T.C.B. H.B.B.