[tcb] Re: steering box rebuild
- From: singlecabboy <sealingwaxred@xxxxxxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Tue, 8 May 2007 17:09:48 -0700 (PDT)
Brian ... that raised bus would come in handy
--- evilscientistboo@xxxxxxxxxxxxx wrote:
> It could be the center pin as well.
> I would r&r the box with a rebuilt unit from
> wolfgang or bus boys. The big issue is getting it
> high enough or over a pit because the steering shaft
> comes out with the box.
>
> Sent via BlackBerry from T-Mobile
>
> -----Original Message-----
> From: "Brian Denning" <i_am_cool_fred@xxxxxxxxxxx>
> Date: Tue, 08 May 2007 18:39:23
> To:tcb@xxxxxxxxxxxxx
> Subject: [tcb] steering box rebuild
>
> well i have begun the final welding on the inner
> lower front panel and the
> sterring box will probably have to be removed
> inorder to do a few minor
> touchups with the por 15, under coating, and the
> welder. I have decided that
> while i have it out i ought to think about a
> rebuild.
>
> i have a new drag link, new tie rod ends everywhere
> but still have play in
> the steering wheel the final conclusion that i can
> draw from this is the
> steering box. what should i look for in doing this?
> how difficult could this
> be? should i be able to get needed parts at the
> local classic vw supply
> shop?
>
>
_________________________________________________________________
> Make every IM count. Download Messenger and join the
> i?m Initiative now.
> It?s free.
>
http://im.live.com/messenger/im/home/?source=TAGHM_MAY07
>
>
>
Paul Smith
www.23window.com/thezone
T.C.B.
H.B.B.
Other related posts:
