Before everyone got so sophisticated some of us old old schoolers would bend the bail on the valve cover to increase the tension.that saved my ass a lot of times.It's cheap too.
ole blue----- Original Message ----- From: "Brian Denning" <i_am_cool_fred@xxxxxxxxxxx>
To: <tcb@xxxxxxxxxxxxx> Sent: Thursday, January 11, 2007 8:56 AM Subject: [tcb] hershey is fixed
my top secret work is now finished. so now i can tell you what happened. i tood the fan shroud off to fix a minor oil leak. when i say minor i mean a half a quart in a weeks worth of driving. the cooler seals were leaking. so i went to take off the dang cooler stand (dog house) and ripped a bolt head off. the damn thing broke flush, it blended in with the case, couldn't find the bolt at all. well i brought in a pro...my dad. he managed to find it drill it out, and retap the hole. all being done really carefully so no shavings will get in the motor.so what was the leak you ask? well, a combination of things, a missing bolt and dried crusty cracked gaskets (cheapies evidently). so the solution: german seals, yes they make them, didn't know they did but they do, and properly torqued bolts (all six of them).all i lack to having him running are tightening the mustache bar bolts (where it mounts to the body) and carb bolts, hooking up the oil light and coil wire, and feeding and hooking up the throttle cable.this weekend, before i even crank it i am going to change the oil just incase there were any shavings in the case. and put on my new sump plate to fix that leak.one problem i am having though. the passenger side valve cover bail is loose, i have replaced it twice with og bails and the thing is so loose i can pop it off with my bare hand. what is a solution to that? that is the only place left for a leak._________________________________________________________________The MSN Entertainment Guide to Golden Globes is here. Get all the scoop. http://tv.msn.com/tv/globes2007/?icid=nctagline2
