No. Check the diagram here: http://66.34.72.138/wiring/bus-69-70.jpg Goes from "30" on starter to "30" on headlight switch. Then jumper from "30" on headlight switch to "30" on ignition switch. G2 On Mon, 16 Oct 2006 19:48:11 -0500 Chuck Blue <sukchew@xxxxxxx> wrote: > Better do some more checking.The main wire from the battery should go to the > Ing. switch and then on to the headlight switch. > That's just my .02.Have fun.How far away are you from Athens? > ole blue > ----- Original Message ----- > From: "Brian Denning" <i_am_cool_fred@xxxxxxxxxxx> > To: <tcb@xxxxxxxxxxxxx> > Sent: Monday, October 16, 2006 11:53 AM > Subject: [tcb] electrical issues > > > > so i was telling will this saturday night. and he laughs because evidently > > all bays are crazy like this but i thought i would share th story > > > > hershey has had an eletcrical problem for a while now. everytime you hit a > > bump he dies. then i reach down and tap the fuse panel a couple of times > > and he fires back up lets out a big BOOOM!!! and we're off again. > > > > well due to the p/o's p/o there has been some crazy engineering done to > > the electrical system. fuses used as clamps to hold wires in place so...i > > decided it is time to clean up the rats nest. so i pulled the fuse panel > > out...which was held in place by two zip ties. and went to work, > > constantly check my bently diagrams. i get it all cleaned up looks > > beautiful under the dash wires tied up and secure taped together so they > > don't dangle and bind in other parts of the bus (windshield wiper motor in > > particular). looks really good. so i hook up the battery and the damn > > parking lights come on. the switch isn't on but the lights are on. ok i > > can address that i will just get out the test light. well i have juice to > > a wire that should only have juice when the switch is on. can't figure it > > out. well i can fix that later lets see if she starts, and see if the > > loose connection problem is taken care of. i turn the key on, nothing, no > > lights, no sounds, nothing.hmmm.... lets see if the headlight switch will > > turn on the headlights. WTF?!?! now i have dash lights such as the oil > > preassure light and the battery light. and it starts up. i turn off the > > lights and the motor dies. > > > > wierd...i know. so i pull the column again, pull the fuse panel again, and > > pull the light switch. hmmm. i hook the battery up and nothing no lights. > > i turn the lights on and nothing, no lights. but i hear a bit of a noise > > commign from the dash every time i touch the column. AHH HA!!! the > > positive wire that goes from the solenoid to the light switch was loose > > the entire time and that is what was causing the damn thing to die when i > > flash my lights to signal truckers over. well problem was fixed on friday > > and today, maybe, i will button everything up and start working on heater > > cables. > > > > it's absolutely amazing that a wire going to the light switch would cause > > the damn thing to die and not run sometimes as well. > > > > thank god for the bently book that helped me out 100% > > > > _________________________________________________________________ > > Get FREE company branded e-mail accounts and business Web site from > > Microsoft Office Live > > http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/ > > > >