Thank you for all of your suggestions, sounds like PB is better than the WD 40 that I have been using. This started with the intent of a front and rear brake job and I was not able to break the rear axle nut so I decided to replace fronts and adjust the rear. I have the parts for the rear and figured I'd work on that after the trip to MP resort. Then after a test drive and good break function I parked it in the garage and a the passenger side e brake cable snapped when I engaged it. Sounds like I need an axle whacker or wamer. Where can I get one? I have been told that I should not drive the bus in this condition b/c the remaining cable can wrap inside of the drum, so making it to a shop or T@P like this doesn't sound likely (but I'll get there). I'll recruit some help/strength and a whacker. Thanks again. ____________________________________________________________________________________ Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more. http://mobile.yahoo.com/go?refer=1GNXIC