[tcb] Re: Front turn signal housing?
- From: "Bergman" <bergmanfamily@xxxxxxxxxxxxx>
- To: <tcb@xxxxxxxxxxxxx>
- Date: Wed, 13 Jan 2010 05:56:33 -0600
You do know that the back up lights get their juice from the hot side of the
coil. So with out having the motor in, you are going to have to run a jumper
off the battery.
-----Original Message-----
From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf
Of Gerald Livingston
Sent: Tuesday, January 12, 2010 10:48 PM
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: Front turn signal housing?
The sockets are a bit loose and one of the welded in nuts is missing on
the right base. I think I can clean and tweak to get them in better
working order. I just wanted to be able to replace them with repops
while I work on the originals. I have the same problem with the back-up
light housings. I can find lenses and seals all day but no bases and
the sockets are very twitchy. It may be fairly easy to cut the sockets
out of the back-up lights and put in replacements though.
All the outside lights are working now except the back up lights. Looks
like I need a new reverse switch. Should be stabbing the motor
tomorrow. Have to replace the fulke hose while it's out. Sucks that no
local shops carry 7mm hose. I bought 1/4" but it "feels big".
G2
On Tue, 12 Jan 2010 22:37:39 -0500
theresabuckner@xxxxxxx wrote:
> Hello Never know I might have a good turn signal base ???
> Terry
>
>
>
>
>
> -----Original Message-----
> From: sammie smith <bugcollections@xxxxxxxxxxxxx>
> To: tcb@xxxxxxxxxxxxx
> Sent: Tue, Jan 12, 2010 7:42 pm
> Subject: [tcb] Re: Front turn signal housing?
>
>
>
>
> Surely as many of those things that are sitting around in salvage
> yards there should be some good used ones out there. Will check with
> Oakhill Auto if you want to see if they may have some laying around.
>
> --- On Tue, 1/12/10, Gerald Livingston <gerald.tcb@xxxxxxxxxxxxx>
> wrote:
>
>
> From: Gerald Livingston <gerald.tcb@xxxxxxxxxxxxx>
> Subject: [tcb] Re: Front turn signal housing?
> To: tcb@xxxxxxxxxxxxx
> Date: Tuesday, January 12, 2010, 6:23 PM
>
>
> Lenses and seals only.
>
> On Tue, 12 Jan 2010 14:44:25 -0800 (PST)
> sammie smith <bugcollections@xxxxxxxxxxxxx> wrote:
>
> > Have you tried Wolfsburg West?
> >
> > --- On Tue, 1/12/10, Gerald Livingston <gerald.tcb@xxxxxxxxxxxxx>
> > wrote:
> >
> >
> > From: Gerald Livingston <gerald.tcb@xxxxxxxxxxxxx>
> > Subject: [tcb] Front turn signal housing?
> > To: tcb@xxxxxxxxxxxxx
> > Date: Tuesday, January 12, 2010, 12:58 PM
> >
> >
> > So, no one makes a repop front turn signal housing for the 68 - 72
> > or is it some generic Hella that fits other Euro vehicles and is
> > therefore not commonly listed at VW parts sources?
> >
> > Gerald
> >
>
>
>
>
>
Other related posts:
