[tcb] Re: Clutch spring. another part I never thought about.
- From: "Duncan" <whocanduncan1@xxxxxxxxx>
- To: "TCB" <tcb@xxxxxxxxxxxxx>
- Date: Fri, 24 Feb 2012 04:27:55 +0000
Off topic but it sounds like you lubed your toes. Yuckyuckyuck.
Please join us at Nac.
-----Original Message-----
From: "Denis Dodson" <coocoo@xxxxxxx>
Sender: tcb-bounce@xxxxxxxxxxxxx
Date: Thu, 23 Feb 2012 22:21:28
To: <tcb@xxxxxxxxxxxxx>
Reply-To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Clutch spring. another part I never thought about.
So, Murray's clutch pedal would not come back all the way up and it would be
like the clutch is slipping until I pulled it back up with my toes.
I lubed everything and loosened and tightened the pedal arm. I adjusted the
clutch cable until it was too tight and the pedal would still not come up
all the way.
So, I called Chuck and he confirmed that there was only the one spring.
So, in true Arkie tech fashion I drove a drywall screw between the screw and
the clutch lever at the transmission and . everything works perfectly.
Freaking $2.25 spring.
Has anybody ever replaced the spring? Can I do it without pulling the
transmission? The Wolfgang website says there is a clip that holds on the
lever.
If I have to pull the engine then I'll have to do the valve job and if I get
into the tranny then I need a new pressure plate and throw out bearing..
Maybe I won't make Nacogdoches.
Other related posts:
