It's not trailers, it's Denis. You have to remember.. Pony Tail = Hard on Busses. That's a Theorem that has proven itself time and time again. On Thu, Aug 6, 2009 at 4:25 PM, sammie smith <bugcollections@xxxxxxxxxxxxx>wrote: > Those trailering miles are hard on steering boxes. If you don't believe > trailers are hard on steering boxes just ask Denis. > > --- On *Thu, 8/6/09, Conrad Klahn <conradk@xxxxxxx>* wrote: > > > From: Conrad Klahn <conradk@xxxxxxx> > Subject: [tcb] Re: 24mm reamer > To: tcb@xxxxxxxxxxxxx > Date: Thursday, August 6, 2009, 2:14 PM > > > Luckily I did my steering box in '83? I forgot when, but have put about 250 > (trailered) miles on it since then. :-) > On Aug 6, 2009, at 9:39 AM, Greg Silkenson wrote: > > I tried to do mine a few weeks ago ('64 sc) thought I could use a wood > dowel to drive out the old bushings, didn't even budge them. I even had the > new bushings reamed before I tried to install them, I don't think that would > have worked either. Soo...I just put in all the new parts (except the > bushings) and left the old bushings there, I use my truck for my > business and I needed it back on the road. It is better,...... the real > problem is the steering box. : ( > > Greg > > --- On *Wed, 8/5/09, ken linoski > <dblcab67@xxxxxxxxx<http://us.mc833.mail.yahoo.com/mc/compose?to=dblcab67@xxxxxxxxx> > >* wrote: > > > From: ken linoski > <dblcab67@xxxxxxxxx<http://us.mc833.mail.yahoo.com/mc/compose?to=dblcab67@xxxxxxxxx> > > > Subject: [tcb] 24mm reamer > To: > tcb@xxxxxxxxxxxxx<http://us.mc833.mail.yahoo.com/mc/compose?to=tcb@xxxxxxxxxxxxx> > Date: Wednesday, August 5, 2009, 4:14 PM > > Hi all, > > Anyone have a 24mm reamer for the bus center pin and would not mind renting > it. I am getting ready for the job and would like to check here before > committing to WW. TIA > > > -- My Email Moniker http://www.findinternettv.com/Video,item,1570570433.aspx