[tcb] Re: 24mm reamer
- From: shirley hall <vwbuslady@xxxxxxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Thu, 6 Aug 2009 19:05:55 -0700 (PDT)
Didn't the theorem actually state:
"Male With Pony Tail = Hard On Busses"
; )
--- On Thu, 8/6/09, Neil <nbmdude@xxxxxxxxx> wrote:
From: Neil <nbmdude@xxxxxxxxx>
Subject: [tcb] Re: 24mm reamer
To: tcb@xxxxxxxxxxxxx
Date: Thursday, August 6, 2009, 8:34 PM
Well, can't argue with that...
--- On Thu, 8/6/09, w.wood <evil.scientist.boo@xxxxxxxxx> wrote:
> From: w.wood <evil.scientist.boo@xxxxxxxxx>
> Subject: [tcb] Re: 24mm reamer
> To: tcb@xxxxxxxxxxxxx
> Date: Thursday, August 6, 2009, 6:53 PM
> It's not trailers, it's Denis.
> You have to remember.. Pony Tail = Hard on Busses.
>
> That's a Theorem that has proven itself time and time
> again.
>
>
> On Thu, Aug 6, 2009 at 4:25 PM,
> sammie smith <bugcollections@xxxxxxxxxxxxx>
> wrote:
>
>
> Those trailering miles are hard on steering boxes. If you
> don't believe trailers are hard on steering boxes just
> ask Denis.
>
> --- On Thu, 8/6/09, Conrad Klahn <conradk@xxxxxxx>
> wrote:
>
>
>
> From: Conrad Klahn <conradk@xxxxxxx>
> Subject: [tcb] Re: 24mm reamer
>
> To: tcb@xxxxxxxxxxxxx
> Date: Thursday, August 6, 2009, 2:14 PM
>
>
> Luckily I did my steering box in '83? I forgot
> when, but have put about 250 (trailered) miles on it since
> then. :-)
>
>
>
> On Aug 6, 2009, at 9:39 AM, Greg Silkenson
> wrote:
>
>
>
>
>
>
> I tried to do mine a few weeks ago ('64 sc)
> thought I could use a wood dowel to drive out the old
> bushings, didn't even budge them. I even had the new
> bushings reamed before I tried to install them, I don't
> think that would have worked either. Soo...I just put in
> all the new parts (except the bushings) and left the old
> bushings there, I use my truck for my business and I
> needed it back on the road. It is better,...... the real
> problem is the steering box. : (
>
>
> Greg
>
> --- On Wed, 8/5/09, ken
> linoski <dblcab67@xxxxxxxxx>
> wrote:
>
>
>
> From: ken linoski <dblcab67@xxxxxxxxx>
>
> Subject: [tcb] 24mm reamer
> To: tcb@xxxxxxxxxxxxx
> Date: Wednesday, August 5, 2009, 4:14 PM
>
>
>
> Hi all,
>
> Anyone have a 24mm reamer for the bus center pin and
> would not mind renting it. I am getting ready for the job
> and would like to check here before committing to WW.
> TIA
>
>
>
>
> --
> My Email Moniker
> http://www.findinternettv.com/Video,item,1570570433.aspx
>
>
>
Other related posts:
