[studiorecorder] Re: sound card recording

  • From: Steve Sparrow <info@xxxxxxxxxxxxxxxxxxx>
  • To: "studiorecorder@xxxxxxxxxxxxx" <studiorecorder@xxxxxxxxxxxxx>
  • Date: Thu, 11 Aug 2016 23:25:18 +1000

yep that’s the way i do it. although i am not up on  windows 10, as i use a mac 
most of the time these days. But basically if i was going to do this task with 
studio recorder i’d set the  screen reader to only use  the on board sound, 
then get a nice interface for all other audio, , and tell studio recorder to 
use this device. it should be doable, but you might have to play around a bit. 
I think you may have to make your default device the interface you want to 
record from, then 

when you play music, and things from the internet it should go to your audio 
interface. and you will have your screen reader coming through your on board 
sound and not being recorded. Interfaces for this are not to expensive, 
depending on what you want, they would start from $100 for something basic, 
the presonis audio box 44 is  quite a good 4 channel interface . but there 
are quite a lot out there. depending on what you want to do. If you only want 
to record things from the internet, you would not need anything too major.

HTH
Steve

On 11 Aug 2016, at 10:14 PM, Peter Torpey <ptorpey00@xxxxxxxxx> wrote:

Your only choices for not recording the speech synthesizer are to mute it or 
output the speech synthesizer to another audio device.
 
--Pete
 
 
From: studiorecorder-bounce@xxxxxxxxxxxxx 
<mailto:studiorecorder-bounce@xxxxxxxxxxxxx
[mailto:studiorecorder-bounce@xxxxxxxxxxxxx ;
<mailto:studiorecorder-bounce@xxxxxxxxxxxxx>] On Behalf Of Deb Trevino
Sent: Thursday, August 11, 2016 8:10 AM
To: studiorecorder@xxxxxxxxxxxxx <mailto:studiorecorder@xxxxxxxxxxxxx>
Subject: [studiorecorder] Re: sound card recording
 
In such a scenario, how do you keep from recording your speech synthesizer?
----- Original Message ----- 
From: bobcorazza@xxxxxxxxx <mailto:bobcorazza@xxxxxxxxx>
To: studio Recorder list <mailto:studiorecorder@xxxxxxxxxxxxx>
Sent: Thursday, August 11, 2016 8:05 AM
Subject: [studiorecorder] sound card recording
 
What settings should I set to record straight from the sound card without 
the microphone. I want to record streams and other sounds that are chaneled 
to the speakers.
Bob c.
 
 
 

 
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
   
This email has been checked for viruses by Avast antivirus software. 
www.avast.com <http://www.avast.com/>
 

Other related posts: