[soapcraft] Re: PROBLEMS

  • From: Rouse Pauline A <Pauline.Rouse@xxxxxxxxxxxxxx>
  • To: "'soapcraft@xxxxxxxxxxxxx'" <soapcraft@xxxxxxxxxxxxx>
  • Date: Tue, 3 Aug 2010 06:56:18 +1000

I used canola oil and 140gms caustic soda.  I use this recipe always as my base 
recipe.  The only change I make is the essential oils
I got it out of a book called "Aromatherapy Soap Making Book" that I bought 
from Lotus Oils
Pauline

From: soapcraft-bounce@xxxxxxxxxxxxx [mailto:soapcraft-bounce@xxxxxxxxxxxxx] On 
Behalf Of Soapcraft
Sent: Tuesday, 3 August 2010 7:55 AM
To: soapcraft@xxxxxxxxxxxxx
Subject: [soapcraft] Re: PROBLEMS

We need to know what sort of veg oil and exactly how much lye in grams then I 
can run it through a calculator.

Pauline you really need to master a calculator as different oils require 
different amounts of lye.  You will run into trouble if you just use that 
recipe and chop and change your oils around.

What we do is a form of science.

Do you know where this recipe came from out of interest?

Regards gina


On 3/08/10 7:34 AM, "Rouse Pauline A" <Pauline.Rouse@xxxxxxxxxxxxxx> wrote:
My recipe is:
500gms palm oil, 250gms coconut oil, 250gms veg. oil, 5mls castor oil, 400mls 
filtered water, 2/3 cup caustic soda, vanilla essence and coffee fragrant oil.
If you do muck up mix is it really worth reheating and trying again.  Is there 
anything I can do to get rid of the stickiness of the soap.
Pauline


From: soapcraft-bounce@xxxxxxxxxxxxx [mailto:soapcraft-bounce@xxxxxxxxxxxxx] On 
Behalf Of Soapcraft
Sent: Monday, 2 August 2010 3:16 PM
To: soapcraft@xxxxxxxxxxxxx
Subject: [soapcraft] Re: PROBLEMS

Did you mix the oil with the lyes or the lye to the oil?

Need to know more.  What oils and what amounts were used please.

And rebatched soap is snotty.

Gina


On 2/08/10 7:45 AM, "Rouse Pauline A" <Pauline.Rouse@xxxxxxxxxxxxxx> wrote:
My third batch of soap - not good.  When I mixed the oil with the lye it 
instantly went solid before I could put it into moulds.  I think I put too much 
Palm oil in.  Next day grated half of that batch and reheated it and trickled 
in filtered water slowly.  Took another 600mls but it looked like and felt like 
it had a bad cold (snotty).  As it cooled it turned white and was manageable 
but now feels sticky.  What went wrong?
Pauline


Other related posts: