No I wouldn¹t recommend that. gina On 2/08/10 3:27 PM, "Rouse Pauline A" <Pauline.Rouse@xxxxxxxxxxxxxx> wrote: > I will bring in my recipe tomorrow and send it out. I mixed the lye to the > oil. > Will the soap be any good? How about I dust it with a little talc to get rid > of the stickiness or maybe some flour/baking soda/baking powder and then dust > if of? > Pauline > > > From: soapcraft-bounce@xxxxxxxxxxxxx [mailto:soapcraft-bounce@xxxxxxxxxxxxx] > On Behalf Of Soapcraft > Sent: Monday, 2 August 2010 3:16 PM > To: soapcraft@xxxxxxxxxxxxx > Subject: [soapcraft] Re: PROBLEMS > > Did you mix the oil with the lyes or the lye to the oil? > > Need to know more. What oils and what amounts were used please. > > And rebatched soap is snotty. > > Gina > > > On 2/08/10 7:45 AM, "Rouse Pauline A" <Pauline.Rouse@xxxxxxxxxxxxxx> wrote: > My third batch of soap not good. When I mixed the oil with the lye it > instantly went solid before I could put it into moulds. I think I put too > much Palm oil in. Next day grated half of that batch and reheated it and > trickled in filtered water slowly. Took another 600mls but it looked like and > felt like it had a bad cold (snotty). As it cooled it turned white and was > manageable but now feels sticky. What went wrong? > Pauline > > >