[slikom] Re: Preuzimanje iz total komandera
- From: "Gordan Radic" <gordan.radic@xxxxxxxxx>
- To: <slikom@xxxxxxxxxxxxx>
- Date: Tue, 11 Sep 2007 01:19:53 +0200
Pozdrav.
U principu, odgovor je da.
Tipkom F5 zamijenjujes standardnu kombinaciju Copy / Paste (CTRL i C, CTRL i
V) iz My Computera ili Windows Explorera.
Sam nacin kopiranja u Total Commanderu ipak malo drugacije funkcionira.
Glavni prozor se sastoji od dva panela (lijevog i desnog), a u svakom panelu
posebno odaberes zeljenu lokaciju. Npr, na lijevom panelu otvoris CD s kojeg
zelis kopirati muziku, na desnom panelu otvoris My Music folder.
Zatim na lijevom panelu gdje je CD odaberes jedan, vise ili sve fajlove,
stisnes F5 i Enter. Zeljeni fajlovi kopiraju se u My Music folder koji je
odabran na desnom panelu.
Ovo je vrlo kratak i sazet opis ove funkcije. O funkcijama u Total
Commanderu te rjesavanju raznoraznih problema pomocu njih mogla bi se
napisati i prosjecna knjiga, mozda se cak i primim toga kad zazive
funkcionalne skripte za Jaws.
Regards
G
MSN: zarakijel@xxxxxxxxx
----- Original Message -----
From: "Miša Radovanovic" <musicmaestro@xxxxxxxxx>
To: <slikom@xxxxxxxxxxxxx>
Sent: Monday, September 10, 2007 9:49 PM
Subject: [slikom] Re: Preuzimanje iz total komandera
> Meni se u ovom slučaju učinio interesantnim taster "f5.
> Pošto trenutno nemam nikog kod kuće, a iz informacije primećujem da je
> on
> za kopiranje fajlova, da li to znači, da korišćenjem ove funkcije, mogu
> iskopirati muziku sa CD-a i preneti ga negde na drugom mestu u
> kompjuteru?
> Izvinjavam se ako nisam ulogu ove komande najbolje razumeo?
> Hvala na dodatnom objašnjenju, ali i Gradimiru, na spisku komandi sa
> tastature, koje ću zaista kasnije vrlo detaljno pregledati.
> Učesnik na temu.
> ----- Original Message -----
> From: "Gradimir Kragic" <bastono@xxxxxxxx>
> To: <slikom@xxxxxxxxxxxxx>
> Sent: Monday, September 10, 2007 8:43 PM
> Subject: [slikom] Re: Preuzimanje iz total komandera
>
>
>>
>>
>>
>> Zdravo Mišo,
>>
>> U prošloj poruci si napisao i ovo:
>>
>> Da li to praktično znači, da je ova povlastica predviđena samo onima koji
>> koriste miš?
>>
>> Moj odgovor je izričito, da nije. Evo i dokaza. U nastavku ove poruke
>> stavljam listu komandi sa tastature koje se koriste u programu Total
>> commanderu.
>> Ako ovo detaljno pogledaš, broj komandi to svakako zahtjeva, onda ćeš
>> vidjeti da
>> se mnogo koriste funkcijski tasteri, sami ili u kombinaciji sa tasterima,
>> control, Alt, Shift i slično. Treba jedino voditi računa kada se koriste
>> tasteri
>> sa numeričke tastature.
>>
>> Keyboard Layout of Total Commander
>>
>> Key Action
>>
>> F1 Help
>> F2 Reread source window
>> F3 List files
>> F4 Edit files
>> F5 Copy files
>> F6 Rename files
>> F7 Create directory
>> F8 or DEL Delete files
>> F9 Activate menu above source window (left or right)
>> F10 Activate left menu or leave menu
>> ALT+F1 Change left drive
>> ALT+F2 Change right drive
>> ALT+F3 Use external viewer
>> ALT+F4 Exit
>> ALT+F5 Pack selected files
>> ALT+F6 Unpack all files from archive under cursor (not
>> working
>> on Windows 95!)
>> ALT+F7 Find
>> ALT+F8 Opens the history list of the command line
>> ALT+F9 Same as ALT+F6 (because ALT+F6 is broken on
>> Windows
>> 95)
>> ALT+SHIFT+F9 Test archives for integrity
>> ALT+F10 Open a directory tree window
>> ALT+left or right Open previous/next directory in list of already
>> visited
>> dirs
>> ALT+down Open list of already visited dirs
>> SHIFT+F1 Choose custom columns view
>> SHIFT+F2 Compare file lists
>> SHIFT+F3 List only file under cursor, when multiple files
>> selected
>> SHIFT+F4 Create new text file and load into editor
>> SHIFT+F5 Copy files (with rename) in the same directory
>> CTRL+SHIFT+F5 Create shortcut of files in target directory
>> SHIFT+F6 Rename files in the same directory
>> SHIFT+F10 Show context menu
>> SHIFT+ESC Iconize Wincmd
>> NUM + Expand selection
>> NUM - Shrink selection
>> NUM * Invert selection
>> NUM / Restore selection
>> CTRL+NUM + Select all
>> CTRL+NUM - Deselect all
>> ALT+NUM + Select all files with the same extension
>> BACKSPACE or CTRL+PgUp Change to parent directory (corresponds to cd ..)
>> CTRL+PgDn Open directory/archive (also self extracting .EXE
>> archives)
>> CTRL+< Jump to the root directory
>> CTRL+left or right Open directory/archive and display it in the
>> target
>> window.
>> If the cursor is not on a directory name, the
>> current
>> directory is
>> displayed instead.
>> CTRL+F1 File display 'brief' (only file names)
>> CTRL+SHIFT+F1 Thumbnails view (preview images)
>> CTRL+F2 File display 'full' (all file details)
>> CTRL+SHIFT+F2 Comments view
>> CTRL+F3 Sort by name
>> CTRL+F4 Sort by extension
>> CTRL+F5 Sort by date/time
>> CTRL+F6 Sort by size
>> CTRL+F7 Unsorted
>> CTRL+F8 Display directory tree
>> CTRL+F9 Print file under cursor using the associated
>> program
>> CTRL+F10 Show all files
>> CTRL+F11 Show only programs
>> CTRL+F12 Show user defined files
>> TAB Switch between left and right file list
>> Letter Redirected to command line, cursor jumps to
>> command
>> line
>> INSERT Select file or directory
>> SPACE Select file or directory (as INSERT). If SPACE is
>> used on
>> an unselected
>> directory under the cursor, the contents in this
>> directory are counted
>> and the size is shown in the 'full' view instead of
>> the
>> string <DIR>.
>> ENTER Change directory/run program/run associated
>> program/execute command line
>> if not empty. If the source directory shows the
>> contents
>> of an archive,
>> further information on the packed file is given.
>> SHIFT+ENTER 1. Run command line/program under cursor with
>> preceding
>> command /c and
>> leave open the program's window. Only works if
>> NOCLOSE.PIF is in your
>> Windows directory!
>> 2. With ZIP files: use alternative choice of these
>> (as
>> chosen in Packer
>> config): (Treat archives like directories <-> call
>> associated program,
>> i.e. winzip or quinzip).
>> ALT+SHIFT+ENTER The contents of all directories in the current
>> directory
>> are counted.
>> The sizes of the directories are then shown in the
>> 'full'
>> view instead
>> of the string <DIR>.
>> ALT+ENTER Show property sheet.
>> CTRL+A Select all
>> CTRL+B Directory branch: show contents of current dir and
>> all
>> subdirs in one list
>> CTRL+C Copy files to clipboard (32 bit)
>> CTRL+D Open directory hotlist ('bookmarks')
>> CTRL+F Connect to FTP server
>> CTRL+SHIFT+F Disconnect from FTP server
>> CTRL+N New FTP connection (enter URL or host address)
>> CTRL+I Switch to target directory
>> CTRL+L Calculate occupied space (of the selected files)
>> CTRL+M Multi-Rename-Tool
>> CTRL+SHIFT+M Change FTP transfer mode
>> CTRL+P Copy current path to command line
>> CTRL+Q Show Quick View panel instead of a file list
>> CTRL+R Reread source directory
>> CTRL+T Open new folder tab and activate it
>> CTRL+SHIFT+T Open new folder tab, but do not activate it
>> CTRL+U Exchange directories
>> CTRL+V Paste from clipboard to current dir (32 bit)
>> CTRL+W Close currently active tab
>> CTRL+SHIFT+W Close all open tabs
>> CTRL+X Cut files to clipboard (32 bit)
>> CTRL+Z Edit comment
>> CTRL+UP Open dir under cursor in new tab
>> CTRL+SHIFT+UP Open dir under cursor in other window (new tab)
>> CTRL+TAB Jump to next tab
>> CTRL+SHIFT+TAB Jump to previous tab
>> ALTGR+Letter(s) or Quick search for file name (starting with
>> specified
>> letters) in current
>> CTRL+ALT+Letter(s) directory
>>
>> Command Line: Keys
>> ==================
>>
>> If Total Commander is active, nearly all keyboard input is directed to
>> the
>> command line.
>> Here the layout for some keys:
>>
>> ENTER The command line is executed, if it contains at
>> least one
>> character
>> (otherwise, the program under the cursor in the
>> source
>> window is started).
>> If the command is cd, md or rd, it is executed
>> internally. If it is an
>> internal DOS command, DOS will be executed with
>> this
>> command. Otherwise,
>> a program with the given name is executed.
>> SHIFT-ENTER Like ENTER, but with preceding command /c. After
>> the
>> called DOS program
>> is terminated, its window is not automatically
>> closed.
>> This will only
>> work if the file noclose.pif is in your windows
>> directory.
>> CTRL-ENTER The file under the cursor in the source directory
>> is
>> appended to the
>> command line.
>> CTRL-SHIFT-ENTER The file under the cursor including its path is
>> appended
>> to the command
>> line.
>> CTRL-CURSORDOWN or A list with the latest command lines
>> (history-list)
>> is
>> opened. Hold down
>> ALT+F8 the CTRL key and use the up and down cursor keys
>> to
>> select an entry. By
>> pressing the left or right key, you can edit the
>> command
>> line. This
>> automatically closes the list.
>> TAB or Cursor Keys Puts the cursor back to the source directory.
>> Cursor left
>> and cursor
>> right move the cursor through the command line,
>> even
>> if
>> the cursor was
>> in the source directory before. If brief was
>> selected,
>> these keys move
>> the cursor through the source directory. You then
>> have to
>> hold down
>> SHIFT to move it inside the command line. Cursor up
>> and
>> cursor down
>> move the cursor bar inside the source window, even
>> if it
>> was inside
>> the command line.
>> ESC or CTRL+Y Clears the command line
>> CTRL+C (32 bit) Copy selected text to clipboard
>> CTRL+X (32 bit) Cut selected text to clipboard
>> CTRL+V (32 bit) Paste text from clipboard to command line.
>> CTRL+K Delete to end of line
>> CTRL+W Delete word to the left of the cursor
>> CTRL+T Delete word to the right of the cursor
>>
>>
>>
>> ____________________
>>
>> Za prijavu na ovu listu poslati poruku na adresu:
>> <slikom-request@xxxxxxxxxxxxx> i u polju za tekst upisati, subscribe
>> Za odjavu sa ove liste poslati poruku na adresu:
>> <slikom-request@xxxxxxxxxxxxx> i u polju za tekst upisati, unsubscribe
>> Za pristup arhivi poruka koristiti adresu:
>> //www.freelists.org/archives/slikom/
>> Login: username=slikom Password=mokils
>>
>> ____________________
>
>
>
> ____________________
>
> Za prijavu na ovu listu poslati poruku na adresu:
> <slikom-request@xxxxxxxxxxxxx> i u polju za tekst upisati, subscribe
> Za odjavu sa ove liste poslati poruku na adresu:
> <slikom-request@xxxxxxxxxxxxx> i u polju za tekst upisati, unsubscribe
> Za pristup arhivi poruka koristiti adresu:
> //www.freelists.org/archives/slikom/
> Login: username=slikom Password=mokils
>
> ____________________
>
____________________
Za prijavu na ovu listu poslati poruku na adresu:
<slikom-request@xxxxxxxxxxxxx> i u polju za tekst upisati, subscribe
Za odjavu sa ove liste poslati poruku na adresu: <slikom-request@xxxxxxxxxxxxx>
i u polju za tekst upisati, unsubscribe
Za pristup arhivi poruka koristiti adresu:
//www.freelists.org/archives/slikom/
Login: username=slikom Password=mokils
____________________
Other related posts:
