[sib-access] Re: setup instructions
- From: "Farfar Carlson" <dgcarlson@xxxxxxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Wed, 19 Dec 2012 12:35:51 -0800
Barbie, you're a doll!
I've always wanted to say that, so sorry if you've heard it before.
In any case, the site to download Sib-Access is:
http://www.raisedbar.net/
As to compatibility, I'm pretty sure you can open the properties of the
Sibelius desktop icon and set it to run in compatibility mode, using the
compatibility page. Let me know if you need more help on doing this.
Dave Carlson
Tastefully composed and launched near the Pacific Ocean using a Dell
Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit
----- Original Message -----
From: "Barbie Elliott" <barbieelliott@xxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Wednesday, December 19, 2012 08:49
Subject: [sib-access] Re: setup instructions
Hi,
I'm trying to set up for the first time. I have been monotering this
discussion because I am running windows 7 and wanting to use sib access
scripts with the best configuration possible.
Thanks a ton Tim for getting me going. With the sib 5 serial number you
were able to get for me, I downloaded and registered
5.25. But now I'm having a couple of problems.
First, when I try to run version 5.25 I get a message that says it is not
compatible with the version of windows I am running. I have Windows 7 with
64 bits. I Went to the reccommended links and found a compatibility tool
for 5 and windows 7. and downloaded it from the Sibelius website. I ran
the tool and it says there are no compatibility problems. The
error message still comes up when I try to open sibeleus. I can bypass the
message and open it, but I'm not sure if it's working correctly, since I
haven't gone to the next step of downloading the sib access scripts.
Next, I can find a bunch of articles about sib access but not the actual
scripts. Can someone send me the link to download these?-----Original
Message-----
From: Chris Smart
Sent: Tuesday, December 18, 2012 9:56 AM
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Re: setup instructions
you need version 5.25.
At 10:53 AM 12/18/2012, you wrote:
>Hello again…
>
>
>Are there specific setup instructions for Sib
>5.2. I installed from version
>5.1 I had not upgraded to version 5.2 Is
>version 5.2 the version that is
>stable? That is am I supposed to be having problems if I run Sib 5.1
>(obviously, I’m not running the scripts yet).
>
>
>
>If there are any setup instructions for Windows
>7 can someone point me in
>the right direction please?
>
>
>
>Joël
>
>
>If you wish to unsubscribe, send a blank message
>with the single word, unsubscribe - in the Subject line to:
>sib-access-request@xxxxxxxxxxxxx
--------------------------------------------------
CTS MASTERING, affordable and professional mixing
and mastering: http://www.ctsmastering.com
Twitter: https://twitter.com/#!/CTSMASTERING
BLOG: www.ctsmastering.com/blog
Linked In: http://ca.linkedin.com/pub/chris-smart/46/824/536
Dropbox, Share Files Easily: http://db.tt/bQ2GuIt
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
