You can work out which notes are slurred by the coordinates. The endpoint of the slur tells you the position of the last note to be slurred. You can also press Space or Shift + Space to extend or retract the right end of the slur by one note at a time. Each time you do this you'll hear the new start and end points of the slur. One thing to bare in mind is that slurs are a special kind of line. Some lines can have start and end points which don't line up exactly with the notes they are above, hairpins are a good example because the end point will have a rhythmic position that coincides with the note that comes after the hairpin. EG: if you have four quarters in a bar, select three of them and press "H" then a hairpin will be added from quarter 1 to quarter 4. The end point of 4 indicates that the hairpin goes right up to the end of the third note, almost as though it is just touching the fourth note. Slurs don't work like this. The end point is the position of the last note that is actually slurred. So if you followed the example above but pressed "S" to add a slur instead of "H", then the slur would have an endpoint of 3 not 4. Dan Rugman visit the new on-line resource for visually impaired musicians and home of Sibelius Access. www.musicaccess.co.uk -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Vytautas Jr Sent: 06 April 2009 06:46 To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] Re: rudimentary Sibelius question Good. Just checking. Thanks. Cheers Vytautas -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Claudio Sacco Sent: 6 avril 2009 01:31 To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] Re: rudimentary Sibelius question The slur goes from the first to the last note of your selection. Claudio -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Vytautas Jr Sent: Sunday, April 05, 2009 10:01 PM To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] rudimentary Sibelius question Hi, I have a question that may seem like a beginner's question, but it's simply that this detail drifted from my memory. When you select a passage and put a slur over it,is the last note of the selection slurred to the next one which you haven't selected or does the slur finish at the last note of your selection? Cheers Vytautas If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx