ok, sorry. you are right. and, thanks again for the documentation. On 2/1/13, Farfar Carlson <dgcarlson@xxxxxxxxxxxxx> wrote: > Lior, > > You are unfair. We cannot know what someone else writes if the mail has not > > yet transmitted. You should know that. That is a very typical fact with > e-mail lists. I sense you are thinking you are so very clever with your > taunt. > > Now since you have opened that box, I will continue. I have observed that > you Lior have persisted to not answer our simple questions as to whether you > > have read documentation for completely installed the product, and yet you > come to us with problems to solve that do not have a solution because you > have cause the problem yourself. > > Lior, you need to read *your* messages and take our advice before you ignore > > them and do your own thing. We all went through the same learning process, > but for those who followed all the steps, we were better able to use the > product. We did not flood the list with questions for which there is either > > no answer, or else a very simple answer right in the documentation, right in > > your hands. > > Lior, you may (or may not) have noticed that I took time yesterday to send > you a few very helpful documents to get you going and I wonder if you > bothered to read any of them? > > Lior, I am not inclined to be so helpful in the future. I hope you are able > > to figure out Sibelius on your own from now on. > > Dave Carlson > Tastefully composed and launched near the Pacific Ocean using a Dell > Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit > > > ----- Original Message ----- > From: "lior goldfarb" <goldlior85@xxxxxxxxx> > To: <sib-access@xxxxxxxxxxxxx> > Sent: Friday, February 01, 2013 11:13 > Subject: [sib-access] Re: problems with properties window > > > hey chris and dave, > please read what people write before writing. > > On 2/1/13, Chris Smart <csmart8@xxxxxxxxx> wrote: >> in the zip file you downloaded that contains Sibelius Access! >> Did you install Sibelius Access yourself? If so, part of that >> involved adding the contents of a .reg file to the registry by >> simply hitting ENTER on the file name and saying "yes" to a prompt. >> This is all covered in the installation instructions! >> >> >> >> At 04:11 AM 2/1/2013, you wrote: >>>hey saeed, >>>where can i find this .reg file? >>> >>>On 1/31/13, Chris Smart <csmart8@xxxxxxxxx> wrote: >>> > yes, read documentation carefully, follow the steps etc. >>> > >>> > >>> > At 12:04 PM 1/31/2013, you wrote: >>> >>Lior, >>> >> >>> >>and, if you tell me to press insert+f1 twice it doesn't work. >>> >> >>> >>I won't tell you because that's not the keystroke. >>> >> >>> >>If you installed Sib-Access then I believe the keystroke is >>> >>Ctrl+1. or >>> >>Ctrl+F1. Not in front of my Sibelius. >>> >> >>> >>You are having all the difficulties of a new user of Sib-Access >>> >>but you >>> >>clearly are not reading the documents that came with the >>> package, the >>> >>installation as well as the startup steps. >>> >> >>> >>You are trying to drive a car without sitting in the front seat. >>> >> >>> >>Dave Carlson >>> >>Tastefully composed and launched near the Pacific Ocean using a >>> Dell >>> >>Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit >>> >> >>> >> >>> >>----- Original Message ----- >>> >>From: "lior goldfarb" <goldlior85@xxxxxxxxx> >>> >>To: <sib-access@xxxxxxxxxxxxx> >>> >>Sent: Thursday, January 31, 2013 08:56 >>> >>Subject: [sib-access] Re: problems with properties window >>> >> >>> >> >>> >>how can i find the sib-access guide? >>> >>and, if you tell me to press insert+f1 twice it doesn't work. >>> >> >>> >>On 1/31/13, Farfar Carlson <dgcarlson@xxxxxxxxxxxxx> wrote: >>> >> > This phenomenon is very clearly explained in the Sib-Access >>> >> documentation. >>> >> > It is a known issue that requires specific steps to resolve. >>> >> Then you >>> >> > should >>> >> > >>> >> > not have the problem any longer. >>> >> > >>> >> > Dave Carlson >>> >> > Tastefully composed and launched near the Pacific Ocean using a >>> >> Dell >>> >> > Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit >>> >> > >>> >> > >>> >> > ----- Original Message ----- >>> >> > From: "lior goldfarb" <goldlior85@xxxxxxxxx> >>> >> > To: "sib-access" <sib-access@xxxxxxxxxxxxx> >>> >> > Sent: Thursday, January 31, 2013 08:03 >>> >> > Subject: [sib-access] problems with properties window >>> >> > >>> >> > >>> >> > hey listers, >>> >> > i have a very strange problem when openning sibelius. >>> >> > when openning sibelius i press on the new score radio button >>> >> and then >>> >> > press finish when i chose the time and key signature. >>> >> > then, it opens a new score and it says to me that the properties >>> >> > window is closed. >>> >> > when i choose the option properties window from in the window >>> >> menu, it >>> >> > says that it checked. >>> >> > and when i press enter on it it stays on the current mode. >>> >> > how to solve this? >>> >> > thanks very much! >>> >> > If you wish to unsubscribe, send a blank message >>> >> > with the single word, unsubscribe - in the Subject line to: >>> >> > sib-access-request@xxxxxxxxxxxxx >>> >> > >>> >> > If you wish to unsubscribe, send a blank message >>> >> > with the single word, unsubscribe - in the Subject line to: >>> >> > sib-access-request@xxxxxxxxxxxxx >>> >> > >>> >>If you wish to unsubscribe, send a blank message >>> >>with the single word, unsubscribe - in the Subject line to: >>> >>sib-access-request@xxxxxxxxxxxxx >>> >> >>> >>If you wish to unsubscribe, send a blank message >>> >>with the single word, unsubscribe - in the Subject line to: >>> >>sib-access-request@xxxxxxxxxxxxx >>> > >>> > -------------------------------------------------- >>> > CTS MASTERING, affordable and professional mixing and mastering: >>> > http://www.ctsmastering.com >>> > Twitter: https://twitter.com/#!/CTSMASTERING >>> > BLOG: www.ctsmastering.com/blog >>> > Linked In: http://ca.linkedin.com/pub/chris-smart/46/824/536 >>> > Dropbox, Share Files Easily: http://db.tt/bQ2GuIt >>> > >>> > If you wish to unsubscribe, send a blank message >>> > with the single word, unsubscribe - in the Subject line to: >>> > sib-access-request@xxxxxxxxxxxxx >>> > >>>If you wish to unsubscribe, send a blank message >>>with the single word, unsubscribe - in the Subject line to: >>>sib-access-request@xxxxxxxxxxxxx >> >> -------------------------------------------------- >> CTS MASTERING, affordable and professional mixing and mastering: >> http://www.ctsmastering.com >> Twitter: https://twitter.com/#!/CTSMASTERING >> BLOG: www.ctsmastering.com/blog >> Linked In: http://ca.linkedin.com/pub/chris-smart/46/824/536 >> Dropbox, Share Files Easily: http://db.tt/bQ2GuIt >> >> If you wish to unsubscribe, send a blank message >> with the single word, unsubscribe - in the Subject line to: >> sib-access-request@xxxxxxxxxxxxx >> > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx