[sib-access] Re: laptop issue
- From: "Dan Rugman" <sib-access@xxxxxxxxxxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Mon, 6 Apr 2009 12:13:49 +0100
Ugur,
You wrote: One last thing too, in the preferences menu the listboxes are
not read correctly, I get a message saying "no item selected" when I move in
a list.
I've only seen this once before and the cause was a feature which some
graphics cards have that allows you to rotate the display with keystrokes.
You'll need to get a sighted assistant to watch your screen as you use
Sibelius and tell you if anything strange happens. Specifically, open a
score and press Ctrl+Alt+Up Arrow and then Ctrl+Alt+Down Arrow. You may find
that the display turns up-side-down when you press Ctrl+Alt+Up Arrow and
then turns right-side-up when you press Ctrl+Alt+Down arrow.
Let me know if this happens and I can give you some instructions for
disabling this feature in your graphics card.
Dan Rugman
visit the new on-line resource for visually impaired musicians and home of
Sibelius Access.
www.musicaccess.co.uk
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Ugur Yuvarlak
Sent: 05 April 2009 12:44
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] laptop issue
Hello,
well this topic has been mentioned a lot but still there is a problem at my
side too.
I installed sibelius access on a laptop but problem here is that in this
laptop jaws 8 is installed. I followed the instructions to configure the
access for the laptop command set, however I think it doesn't recognize my
keyboard setting. whenever I open access options by ctrl+f1, it shows my
keyboard being desktop.
Another thing too, the caps lock key is not working on access as well, I
can't substitute it with insert key either. I.E. I can't read the current
line pressing either caps or insert keys.
One last thing too, in the preferences menu the listboxes are not read
correctly, I get a message saying "no item selected" when I move in a list.
Thanks ýn advance,
Ugur
If you wish to unsubscribe, send a blank message with the single word,
unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
