[sib-access] Re: Two questions
- From: "Ugur Yuvarlak" <uyuvarlak@xxxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Tue, 3 Mar 2009 11:16:29 +0200
Hi Dave,
Sorry about misleading blunder of myself but I already got what you mean,
when I wanted to say "I tried with all ..." I had meant zoom level which I
can Adjust by ctrl+- and ctrl+=.
Ugur
----- Original Message -----
From: "Dave Carlson" <dgcarlson@xxxxxxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Tuesday, March 03, 2009 5:41 AM
Subject: [sib-access] Re: Two questions
> It's okay, but the resolution is not what I'm talking about. I'm talking
> about the zoom level inside Sibelius. Check that next time. It can range
> from somewhere in the 20% to the 1600% range.
>
> Dave
>
> ----- Original Message -----
> From: "Ugur Yuvarlak" <uyuvarlak@xxxxxxxxxx>
> To: <sib-access@xxxxxxxxxxxxx>
> Sent: Monday, March 02, 2009 3:09 PM
> Subject: [sib-access] Re: Two questions
>
>
> Hello Tim and Dave,
>
> About my "own" problem, I can say that I have already tried all
> resolutions
> with the same result.
>
> About my friends problem, I also followed the instructions given in the
> FAQ
> on this matter.
>
> For sure I don't want to bother you with too much help request but I also
> want to mention that I have done everything I can. I am an FAQ and
> documentation geek kind of person so before asking for help I can reassure
> you that I have used all resources presented either on music access home
> page or help files included in sibelius access.
>
> Still if you can think of something useful I would appreciate it. If not,
> I'll keep looking for a way to resolve the issue.
>
> Lots of thanks
> Ugur
> ----- Original Message -----
> From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
> To: <sib-access@xxxxxxxxxxxxx>
> Sent: Monday, March 02, 2009 10:05 PM
> Subject: [sib-access] Re: Two questions
>
>
>> This could be down to the zoom level - are you set to 400% when you're
>> navigating through the score? You can move to this zoom level in one go
>> by
>> pressing Alt+Equals.
>>
>>
>> Best wishes.
>>
>> Tim Burgess
>> Raised Bar Ltd
>> Phone: +44 (0)1827 719822
>>
>> Don't forget to vote for improved access to music and music technology at
>>
>> http://www.raisedbar.net/petition.htm
>>
>> -----Original Message-----
>> From: sib-access-bounce@xxxxxxxxxxxxx
>> [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Ugur Yuvarlak
>> Sent: 02 March 2009 14:08
>> To: sib-access@xxxxxxxxxxxxx
>> Subject: [sib-access] Re: Two questions
>>
>> Tim,
>>
>> I wonder if you can give me a clue about why Jaws repeats/delays the
>> current
>> item announcement? if I can sort this out, my scripts will also work with
>> no
>> particular problem.
>>
>> Ugur
>> ----- Original Message -----
>> From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
>> To: <sib-access@xxxxxxxxxxxxx>
>> Sent: Monday, March 02, 2009 3:41 PM
>> Subject: [sib-access] Re: Two questions
>>
>>
>>> Hi,
>>>
>>> 1024 X 768, 32-bit colour shouldn't be a problem - it's what both Dan
>>> and
>>> I
>>> are running. Similarly, we've tried the scripts with Jaws versions from
>>> 7.1.500 onwards (including 10) with no issues.
>>>
>>> Best wishes.
>>>
>>> Tim Burgess
>>> Raised Bar Ltd
>>> Phone: +44 (0)1827 719822
>>>
>>> Don't forget to vote for improved access to music and music technology
>>> at
>>>
>>> http://www.raisedbar.net/petition.htm
>>>
>>> -----Original Message-----
>>> From: sib-access-bounce@xxxxxxxxxxxxx
>>> [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Ugur Yuvarlak
>>> Sent: 02 March 2009 12:02
>>> To: sib-access@xxxxxxxxxxxxx
>>> Subject: [sib-access] Re: Two questions
>>>
>>> Thanks again,
>>>
>>> The resolution recomendation I got earlier was not about resolution of
>>> 1024x768 but rather correcting the colour property from "high (32 bit)"
>>> to
>>> "middle (16 bit)". I am told that this will fix the problem of delayed
>>> note
>>> announcements.
>>>
>>> And about my friend's problem, we also thought that jaws difference is
>>> causing problem. I'll wait Dan or Tim to answer these questions as well
>>> though before doing something about it but running his reg files seemed
>>> like
>>> a reasonable suggestion.
>>>
>>> Thanks again,
>>> Ugur
>>> ----- Original Message -----
>>> From: "Claudio Sacco" <cl.sacco@xxxxxxxx>
>>> To: <sib-access@xxxxxxxxxxxxx>
>>> Sent: Monday, March 02, 2009 1:40 PM
>>> Subject: [sib-access] Re: Two questions
>>>
>>>
>>>> Resending this, because my reply seems to be overquoted.
>>>> Hi Ugur
>>>> My screen resolution here is 1024 by 768. I don't know, if there are
>>>> recommended screen resolution. It could be, that the scripts don't work
>>>> with
>>>> Jaws 8. I'm sure, Dan or Tim will join in about Jaws versions
>>>> supported.
>>>> Good luck to you and your friend.
>>>> Claudio
>>>>
>>>> -----Original Message-----
>>>> From: sib-access-bounce@xxxxxxxxxxxxx
>>>> [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Ugur Yuvarlak
>>>> Sent: Monday, March 02, 2009 12:27 PM
>>>> To: sib-access@xxxxxxxxxxxxx
>>>> Subject: [sib-access] Re: Two questions
>>>>
>>>> Hello Vytautas and Claudio,
>>>>
>>>> Thanks for your interest about my problem. As now I am unable to reach
>>>> his
>>>> computer, I am not going to do it by myself but I will pass the
>>>> suggestion
>>>> of running the reg files.
>>>>
>>>> As the answer for Claudio's questions, I don't think I can list so many
>>>> details at once. But he uses jaws 8 while I use jaws 10. Our keyboard
>>>> configurations are same. OS are same as well. I don't know the screen
>>>> resolution but someone else also mentioned about it, so it would be a
>>>> favour
>>>> to tell me under what resolution the scripts work fine in most
>>>> systems..
>>>> I
>>>> don't think programs running in the background has any irrelivent cause
>>>> for
>>>> that I didn't have such a problem with our without running programs in
>>>> the
>>>> background. Still it may behave differently on each conputer but These
>>>> things I could think of immediately.
>>>>
>>>> Thanks to all,
>>>> Ugur
>>>>
>>>> If you wish to unsubscribe, send a blank message
>>>> with the single word, unsubscribe - in the Subject line to:
>>>> sib-access-request@xxxxxxxxxxxxx
>>>
>>> If you wish to unsubscribe, send a blank message
>>> with the single word, unsubscribe - in the Subject line to:
>>> sib-access-request@xxxxxxxxxxxxx
>>>
>>> If you wish to unsubscribe, send a blank message
>>> with the single word, unsubscribe - in the Subject line to:
>>> sib-access-request@xxxxxxxxxxxxx
>>
>> If you wish to unsubscribe, send a blank message
>> with the single word, unsubscribe - in the Subject line to:
>> sib-access-request@xxxxxxxxxxxxx
>>
>> If you wish to unsubscribe, send a blank message
>> with the single word, unsubscribe - in the Subject line to:
>> sib-access-request@xxxxxxxxxxxxx
>
> If you wish to unsubscribe, send a blank message
> with the single word, unsubscribe - in the Subject line to:
> sib-access-request@xxxxxxxxxxxxx
>
> If you wish to unsubscribe, send a blank message
> with the single word, unsubscribe - in the Subject line to:
> sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
