[sib-access] Re: Trouble with a 10-note Tuplet
- From: "Dale Lieser" <dale.lieser@xxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Mon, 24 Nov 2014 07:05:54 -0500
Try setting the 32nd note, then the tuplet. The kind of tuplet you'll need
will require using the "other" option in the Create Tuplet feature. There
will be a dialog there in which you set the numbers.
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Dani Pagador
Sent: Monday, November 24, 2014 6:57 AM
To: sib-access
Subject: [sib-access] Trouble with a 10-note Tuplet
Hi, Everyone.
I need to write a group of 10 32nd notes in the space of a dotted
quarter. The piece I need to reduce is in 6/8 and has a dotted quarter
over the second half of the measure; that group of 10 32nds needs to
go over the space of the first dotted quarter.
I've tried selecting the 32nd note from the F8 keypad layout, playing
the first note in the group, then going to the Create > Tuplet and
putting 9 in the firld (I'm assuming that's what should go there since
I already played the first of the ten notes), and then hit OK. I enter
the remaining 9 notes and have space for more notes before that second
dotted quarter comes up.
What am I missing?
Thanks,
Dani
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
