OK. That makes sense. Thank you for being detailed in your answer. That helps me so much. Dale -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin L Gibbs Sent: Thursday, December 29, 2011 2:11 PM To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] Re: Saving from Sibelius 7 Back to 5 Dale, the answer is probably this. When your engraver sends back a file, it is not exactly the same file you sent him. this explains why, when you make changes to the Sibelius 7 file saved as Sibelius 5 file he sends you, he probably has to redo some of the formatting because it doesn't survive backward compatibility. As to why a file saved in Sibelius 5 from Sibelius 7 would ask you to save changes even though you don't think you've made any, consider this. Even moving to the first bar in a score is considered a change by Sibelius. So, the experiment I recommend is this: 1. Take a Sibelius 5 version that your engraver has sent you in his package. Let's say that this is an, "identical" file to his Sibelius 7 version with the exception that it is saved in Sibelius 5. I would assume that the mere backward save makes it no longer identical. To confirm this, simply open the file and, without touching a single keystroke, (I can't stress this enough,) close the file. If it asks you to save the file, feel free to do so with an alternative descriptive name. You might want to mention this to your engraver and see if he has any thoughts. I think I've got it, though. Kevin If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx