[sib-access] Re: Grace notes
- From: Dan Rugman <daniel.rugman@xxxxxxxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Sat, 18 May 2013 18:50:05 +0100
Saeed,
Sorry, I was looking at the wrong version of Sibelius, it's not available in
v.5.
Dan
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of saeed Mirzazadeh
Sent: 18 May 2013 18:20
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Re: Grace notes
Dan,
in the Filter sub-menue i don't find any option for the grace notes.
there is just an option "notes and cords" on which when i press enter it
doesn't open a window in which i may be able to select only the grace notes.
thanks.
Saeed
On 5/18/13, Dan Rugman <daniel.rugman@xxxxxxxxxxxxxx> wrote:
> You can.
>
> Press Ctrl+A to select the entire score then choose Edit > Filter >
> Grace notes from the menus. This leaves only the grace notes selected.
> Now, when you change the values in the properties window it will
> affect all the selected notes.
>
> Dan
> -----Original Message-----
> From: sib-access-bounce@xxxxxxxxxxxxx
> [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of saeed Mirzazadeh
> Sent: 18 May 2013 17:30
> To: sib-access@xxxxxxxxxxxxx
> Subject: [sib-access] Re: Grace notes
>
> Thanks Dan.
> i'm wandering if it could be possible to do this change as default by
> one operation. i have a lot of grace notes in my score and it takes
> too much time to do it for every passage.
> warm regards,
> Saeed
>
> On 5/18/13, Dan Rugman <daniel.rugman@xxxxxxxxxxxxxx> wrote:
>> You can change how a note plays back by editing it's live playback
>> properties. There are three properties you can change and they are
>> all found in the playback panel of the properties window.
>>
>> 1. Position
>>
>> Select the note.
>> Go to the playback panel in the properties window and check the box
>> labeled Live Start Position.
>> Enter a value in the edit box next to the check box. +256 makes the
>> note play a quarter note late, +128 an eighth note late, -128 an
>> eighth note early and -256 a quarter note early.
>>
>> 2. Duration
>>
>> Select the note.
>> Go to the playback panel in the properties window and check the box
>> labeled Live Duration.
>> Enter a value in the edit box next to the check box. 256 makes it
>> sound for a quarter note, 128 an eighth note, etc.
>>
>> 3. Velocity
>>
>> This sets the loudness of the selected note. You change it in the
>> same way as the other two values. 127 is the highest value and 0 the
lowest.
>>
>> Dan
>>
>> -----Original Message-----
>> From: sib-access-bounce@xxxxxxxxxxxxx
>> [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of saeed
>> Mirzazadeh
>> Sent: 18 May 2013 12:06
>> To: sib-access@xxxxxxxxxxxxx
>> Subject: [sib-access] Re: Grace notes
>>
>> Hi.
>> i didn't find anything nneither in dictionary nor in playback window
>> to define the grace notes playback speed. would you please let me
>> know more how to do it?
>> thanks in advance.
>> Saeed
>>
>> On 5/16/13, saeed Mirzazadeh <saeedm19@xxxxxxxxx> wrote:
>>> thanks for all advices.
>>> since i have to ask a sited person, i'll try it tomorrow. then i'll
>>> let you know the result.
>>> Warm regards,
>>> Saeed
>>>
>>> On 5/16/13, Dan Rugman <daniel.rugman@xxxxxxxxxxxxxx> wrote:
>>>> It's in the playback panel of the properties window. You need to
>>>> modify the values for the live playback position and duration. A
>>>> quarter note is worth
>>>> 256 units, so setting the position to -128 will have the note play
>>>> one eighth note before the rhythmic position of the written note.
>>>> You'll then need to change the duration to 128 to make sure that
>>>> there
>> isn't a gap.
>>>>
>>>> Dan
>>>> -----Original Message-----
>>>> From: sib-access-bounce@xxxxxxxxxxxxx
>>>> [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Dale Lieser
>>>> Sent: 16 May 2013 21:15
>>>> To: sib-access@xxxxxxxxxxxxx
>>>> Subject: [sib-access] Re: Grace notes
>>>>
>>>> Saeed,
>>>>
>>>> It might indeed be in the Word menu, as Dave says. If not there, I
>>>> think it might be in a playback window, which thing requires
>>>> sighted assistance.
>>>> Also, even though grace notes do not take up rhythmic value in a
>>>> measure, once the grace note is in place, its written value can be
>>>> modified by the regular choices in the Common Notes template. So a
>>>> grace note can be written as a 32nd, 16th, 8th, etc. Again, the
>>>> non-grace notes of the bar notwithstanding, choosing rhythmic
>>>> values of the grace notes themselves implies interpretation, some
>>>> of which Sibelius playback recognizes.
>>>>
>>>> Dale
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: sib-access-bounce@xxxxxxxxxxxxx
>>>> [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Farfar
>>>> Carlson
>>>> Sent: Thursday, May 16, 2013 3:58 PM
>>>> To: sib-access@xxxxxxxxxxxxx
>>>> Subject: [sib-access] Re: Grace notes
>>>>
>>>> Saeed,
>>>>
>>>> I'll bet there is. I'm thinking it's in the word menus, where you
>>>> can define
>>>>
>>>> how sibelius reacts to symbols it encounters while playing.
>>>>
>>>>
>>>> Dave Carlson
>>>> Tastefully composed and launched near the Pacific Ocean using a
>>>> Dell Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit
>>>>
>>>>
>>>> ----- Original Message -----
>>>> From: "saeed Mirzazadeh" <saeedm19@xxxxxxxxx>
>>>> To: <sib-access@xxxxxxxxxxxxx>
>>>> Sent: Thursday, May 16, 2013 11:52
>>>> Subject: [sib-access] Grace notes
>>>>
>>>>
>>>> Hi all.
>>>> is it possible to have Sibelius play the grace notes slower than
>>>> its default?
>>>> thanks in advance.
>>>> Saeed
>>>> If you wish to unsubscribe, send a blank message with the single
>>>> word, unsubscribe - in the Subject line to:
>>>> sib-access-request@xxxxxxxxxxxxx
>>>>
>>>> If you wish to unsubscribe, send a blank message with the single
>>>> word, unsubscribe - in the Subject line to:
>>>> sib-access-request@xxxxxxxxxxxxx
>>>>
>>>> If you wish to unsubscribe, send a blank message with the single
>>>> word, unsubscribe - in the Subject line to:
>>>> sib-access-request@xxxxxxxxxxxxx
>>>>
>>>> If you wish to unsubscribe, send a blank message with the single
>>>> word, unsubscribe - in the Subject line to:
>>>> sib-access-request@xxxxxxxxxxxxx
>>>>
>>>
>> If you wish to unsubscribe, send a blank message with the single
>> word, unsubscribe - in the Subject line to:
>> sib-access-request@xxxxxxxxxxxxx
>>
>> If you wish to unsubscribe, send a blank message with the single
>> word, unsubscribe - in the Subject line to:
>> sib-access-request@xxxxxxxxxxxxx
>>
> If you wish to unsubscribe, send a blank message with the single word,
> unsubscribe - in the Subject line to:
> sib-access-request@xxxxxxxxxxxxx
>
> If you wish to unsubscribe, send a blank message with the single word,
> unsubscribe - in the Subject line to:
> sib-access-request@xxxxxxxxxxxxx
>
If you wish to unsubscribe, send a blank message with the single word,
unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
