[sib-access] Re: Fw: [Sibelius Blog] 2 new plug-ins: Retract Line Ends and Replace Symbol
- From: Chris Smart <csmart8@xxxxxxxxx>
- To: sib-access@xxxxxxxxxxxxx
- Date: Thu, 02 May 2013 10:34:23 -0400
as someone involved in the beta, it appears to be stalled and I
haven't heard anything for some time.
At 10:13 AM 5/2/2013, you wrote:
>Saeed,
>
>No idea. Beta testing is likely still in progress, but whether
>changes have
>been made to code and released, I have not heard. Perhaps Dan will
>chime in
>and comment?
>
>Dave Carlson
>Tastefully composed and launched near the Pacific Ocean using a Dell
>Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit
>
>
>----- Original Message -----
>From: "saeed Mirzazadeh" <saeedm19@xxxxxxxxx>
>To: <sib-access@xxxxxxxxxxxxx>
>Sent: Thursday, May 02, 2013 07:09
>Subject: [sib-access] Re: Fw: [Sibelius Blog] 2 new plug-ins:
>Retract Line
>Ends and Replace Symbol
>
>
>regarding sib-access for sib 6, what's up?
>it should have been published at least 2 months ago! isn't over the
>time of testing and problem verification?
>Regards,
>Saeed
>
>On 5/2/13, Farfar Carlson <dgcarlson@xxxxxxxxxxxxx> wrote:
> > Aw, heck! That's too bad. But at least it will work in Sib 6,
> which we
> > should be able to use with scripts some day.
> >
> > Dave Carlson
> > Tastefully composed and launched near the Pacific Ocean using a
> Dell
> > Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit
> >
> >
> > ----- Original Message -----
> > From: "Dale Lieser" <dale.lieser@xxxxxxxxx>
> > To: <sib-access@xxxxxxxxxxxxx>
> > Sent: Thursday, May 02, 2013 06:04
> > Subject: [sib-access] Re: Fw: [Sibelius Blog] 2 new plug-ins:
> Retract Line
> > Ends and Replace Symbol
> >
> >
> > Have just tried the Retract Line Endings plug-in in Sibelius 5.
> Executing
> > the plug-in results in a message that says something about
> Sibelius 6 or
> > greater being required.
> >
> > Dale
> >
> >
> > -----Original Message-----
> > From: sib-access-bounce@xxxxxxxxxxxxx
> > [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Farfar
> Carlson
> > Sent: Thursday, May 02, 2013 8:38 AM
> > To: sib-access@xxxxxxxxxxxxx
> > Subject: [sib-access] Fw: [Sibelius Blog] 2 new plug-ins:
> Retract Line
> > Ends
> >
> > and Replace Symbol
> >
> > A couple handy plug-ins. Meant for Sib 6 and Sib 7, but I'm
> wondering if
> > someone wants to give them a try in 5.2.5.
> >
> > Dave Carlson
> > Tastefully composed and launched near the Pacific Ocean using a
> Dell
> > Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit
> >
> >
> > ----- Original Message -----
> > From: "Sibelius Blog" <philip@xxxxxxxxxxxxxxxx>
> > To: <dgcarlson@xxxxxxxxxxxxx>
> > Sent: Thursday, May 02, 2013 05:12
> > Subject: [Sibelius Blog] 2 new plug-ins: Retract Line Ends and
> Replace
> > Symbol
> >
> >
> > Sibelius Blog has posted a new item, '2 new plug-ins: Retract
> Line Ends
> > and
> > Replace Symbol'
> >
> > Bob Zawalich just keeps coming up with ways to make our lives a
> little
> > less
> > tedious, at least when working in Sibelius. He's recently
> created two new
> > plug-ins that may save you time on common tasks while working
> in some
> > scores.
> >
> > The first of these plug-ins, Retract Line Ends, pulls back the
> right end
> > of
> > lines [...]
> >
> > You may view the latest post at
> >
> http://www.sibeliusblog.com/tips/2-new-plug-ins-retract-line-ends-and-replace-symbol/
> >
> > You received this e-mail because you asked to be notified when
> new updates
> > are
> > posted.
> > Best regards,
> > Sibelius Blog
> > philip@xxxxxxxxxxxxxxxx
> >
> > If you wish to unsubscribe, send a blank message
> > with the single word, unsubscribe - in the Subject line to:
> > sib-access-request@xxxxxxxxxxxxx
> >
> > If you wish to unsubscribe, send a blank message
> > with the single word, unsubscribe - in the Subject line to:
> > sib-access-request@xxxxxxxxxxxxx
> >
> > If you wish to unsubscribe, send a blank message
> > with the single word, unsubscribe - in the Subject line to:
> > sib-access-request@xxxxxxxxxxxxx
> >
>If you wish to unsubscribe, send a blank message
>with the single word, unsubscribe - in the Subject line to:
>sib-access-request@xxxxxxxxxxxxx
>
>If you wish to unsubscribe, send a blank message
>with the single word, unsubscribe - in the Subject line to:
>sib-access-request@xxxxxxxxxxxxx
--------------------------------------------------
CTS MASTERING, affordable and professional mixing and mastering:
http://www.ctsmastering.com
Twitter: https://twitter.com/#!/CTSMASTERING
BLOG: www.ctsmastering.com/blog
Linked In: http://ca.linkedin.com/pub/chris-smart/46/824/536
Dropbox, Share Files Easily: http://db.tt/bQ2GuIt
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
