[sib-access] Re: Fw: [Sibelius Blog] 2 new plug-ins: Retract Line Ends and Replace Symbol
- From: Chris Smart <csmart8@xxxxxxxxx>
- To: sib-access@xxxxxxxxxxxxx
- Date: Thu, 02 May 2013 10:33:23 -0400
Dan, if you're reading, when are you going to release those Sib6
scripts? They do seem quite stable!
At 09:04 AM 5/2/2013, you wrote:
>Have just tried the Retract Line Endings plug-in in Sibelius 5.
>Executing the plug-in results in a message that says something
>about Sibelius 6 or greater being required.
>
>Dale
>
>
>-----Original Message-----
>From: sib-access-bounce@xxxxxxxxxxxxx
>[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Farfar Carlson
>Sent: Thursday, May 02, 2013 8:38 AM
>To: sib-access@xxxxxxxxxxxxx
>Subject: [sib-access] Fw: [Sibelius Blog] 2 new plug-ins: Retract
>Line Ends and Replace Symbol
>
>A couple handy plug-ins. Meant for Sib 6 and Sib 7, but I'm
>wondering if
>someone wants to give them a try in 5.2.5.
>
>Dave Carlson
>Tastefully composed and launched near the Pacific Ocean using a Dell
>Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit
>
>
>----- Original Message -----
>From: "Sibelius Blog" <philip@xxxxxxxxxxxxxxxx>
>To: <dgcarlson@xxxxxxxxxxxxx>
>Sent: Thursday, May 02, 2013 05:12
>Subject: [Sibelius Blog] 2 new plug-ins: Retract Line Ends and
>Replace
>Symbol
>
>
>Sibelius Blog has posted a new item, '2 new plug-ins: Retract Line
>Ends and
>Replace Symbol'
>
>Bob Zawalich just keeps coming up with ways to make our lives a
>little less
>tedious, at least when working in Sibelius. He's recently created
>two new
>plug-ins that may save you time on common tasks while working in some
>scores.
>
>The first of these plug-ins, Retract Line Ends, pulls back the
>right end of
>lines [...]
>
>You may view the latest post at
>http://www.sibeliusblog.com/tips/2-new-plug-ins-retract-line-ends-and-replace-symbol/
>
>You received this e-mail because you asked to be notified when new
>updates
>are
>posted.
>Best regards,
>Sibelius Blog
>philip@xxxxxxxxxxxxxxxx
>
>If you wish to unsubscribe, send a blank message
>with the single word, unsubscribe - in the Subject line to:
>sib-access-request@xxxxxxxxxxxxx
>
>If you wish to unsubscribe, send a blank message
>with the single word, unsubscribe - in the Subject line to:
>sib-access-request@xxxxxxxxxxxxx
--------------------------------------------------
CTS MASTERING, affordable and professional mixing and mastering:
http://www.ctsmastering.com
Twitter: https://twitter.com/#!/CTSMASTERING
BLOG: www.ctsmastering.com/blog
Linked In: http://ca.linkedin.com/pub/chris-smart/46/824/536
Dropbox, Share Files Easily: http://db.tt/bQ2GuIt
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
