[sib-access] Re: Fw: [Sibelius Blog] 2 new plug-ins: Retract Line Ends and Replace Symbol
- From: "Dale Lieser" <dale.lieser@xxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Thu, 2 May 2013 09:04:09 -0400
Have just tried the Retract Line Endings plug-in in Sibelius 5. Executing the
plug-in results in a message that says something about Sibelius 6 or greater
being required.
Dale
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx]
On Behalf Of Farfar Carlson
Sent: Thursday, May 02, 2013 8:38 AM
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Fw: [Sibelius Blog] 2 new plug-ins: Retract Line Ends and
Replace Symbol
A couple handy plug-ins. Meant for Sib 6 and Sib 7, but I'm wondering if
someone wants to give them a try in 5.2.5.
Dave Carlson
Tastefully composed and launched near the Pacific Ocean using a Dell
Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit
----- Original Message -----
From: "Sibelius Blog" <philip@xxxxxxxxxxxxxxxx>
To: <dgcarlson@xxxxxxxxxxxxx>
Sent: Thursday, May 02, 2013 05:12
Subject: [Sibelius Blog] 2 new plug-ins: Retract Line Ends and Replace
Symbol
Sibelius Blog has posted a new item, '2 new plug-ins: Retract Line Ends and
Replace Symbol'
Bob Zawalich just keeps coming up with ways to make our lives a little less
tedious, at least when working in Sibelius. He's recently created two new
plug-ins that may save you time on common tasks while working in some
scores.
The first of these plug-ins, Retract Line Ends, pulls back the right end of
lines [...]
You may view the latest post at
http://www.sibeliusblog.com/tips/2-new-plug-ins-retract-line-ends-and-replace-symbol/
You received this e-mail because you asked to be notified when new updates
are
posted.
Best regards,
Sibelius Blog
philip@xxxxxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
