[sib-access] Re: Fw: [Sibelius Blog] 2 new plug-ins: Retract Line Ends and Replace Symbol
- From: "Farfar Carlson" <dgcarlson@xxxxxxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Thu, 2 May 2013 07:13:01 -0700
Saeed,
No idea. Beta testing is likely still in progress, but whether changes have
been made to code and released, I have not heard. Perhaps Dan will chime in
and comment?
Dave Carlson
Tastefully composed and launched near the Pacific Ocean using a Dell
Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit
----- Original Message -----
From: "saeed Mirzazadeh" <saeedm19@xxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Thursday, May 02, 2013 07:09
Subject: [sib-access] Re: Fw: [Sibelius Blog] 2 new plug-ins: Retract Line
Ends and Replace Symbol
regarding sib-access for sib 6, what's up?
it should have been published at least 2 months ago! isn't over the
time of testing and problem verification?
Regards,
Saeed
On 5/2/13, Farfar Carlson <dgcarlson@xxxxxxxxxxxxx> wrote:
> Aw, heck! That's too bad. But at least it will work in Sib 6, which we
> should be able to use with scripts some day.
>
> Dave Carlson
> Tastefully composed and launched near the Pacific Ocean using a Dell
> Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit
>
>
> ----- Original Message -----
> From: "Dale Lieser" <dale.lieser@xxxxxxxxx>
> To: <sib-access@xxxxxxxxxxxxx>
> Sent: Thursday, May 02, 2013 06:04
> Subject: [sib-access] Re: Fw: [Sibelius Blog] 2 new plug-ins: Retract Line
> Ends and Replace Symbol
>
>
> Have just tried the Retract Line Endings plug-in in Sibelius 5. Executing
> the plug-in results in a message that says something about Sibelius 6 or
> greater being required.
>
> Dale
>
>
> -----Original Message-----
> From: sib-access-bounce@xxxxxxxxxxxxx
> [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Farfar Carlson
> Sent: Thursday, May 02, 2013 8:38 AM
> To: sib-access@xxxxxxxxxxxxx
> Subject: [sib-access] Fw: [Sibelius Blog] 2 new plug-ins: Retract Line
> Ends
>
> and Replace Symbol
>
> A couple handy plug-ins. Meant for Sib 6 and Sib 7, but I'm wondering if
> someone wants to give them a try in 5.2.5.
>
> Dave Carlson
> Tastefully composed and launched near the Pacific Ocean using a Dell
> Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit
>
>
> ----- Original Message -----
> From: "Sibelius Blog" <philip@xxxxxxxxxxxxxxxx>
> To: <dgcarlson@xxxxxxxxxxxxx>
> Sent: Thursday, May 02, 2013 05:12
> Subject: [Sibelius Blog] 2 new plug-ins: Retract Line Ends and Replace
> Symbol
>
>
> Sibelius Blog has posted a new item, '2 new plug-ins: Retract Line Ends
> and
> Replace Symbol'
>
> Bob Zawalich just keeps coming up with ways to make our lives a little
> less
> tedious, at least when working in Sibelius. He's recently created two new
> plug-ins that may save you time on common tasks while working in some
> scores.
>
> The first of these plug-ins, Retract Line Ends, pulls back the right end
> of
> lines [...]
>
> You may view the latest post at
> http://www.sibeliusblog.com/tips/2-new-plug-ins-retract-line-ends-and-replace-symbol/
>
> You received this e-mail because you asked to be notified when new updates
> are
> posted.
> Best regards,
> Sibelius Blog
> philip@xxxxxxxxxxxxxxxx
>
> If you wish to unsubscribe, send a blank message
> with the single word, unsubscribe - in the Subject line to:
> sib-access-request@xxxxxxxxxxxxx
>
> If you wish to unsubscribe, send a blank message
> with the single word, unsubscribe - in the Subject line to:
> sib-access-request@xxxxxxxxxxxxx
>
> If you wish to unsubscribe, send a blank message
> with the single word, unsubscribe - in the Subject line to:
> sib-access-request@xxxxxxxxxxxxx
>
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
