Hi Dave, I was always aware that this plug-in keystroke could cause problems when the scripts were first installed. The command set file (Sibelius' version of a keymap file) does contain the CONTROL+GRAVEACCENT keystroke, but some users have found that it didn't take. Tim and I have talked this through and we feel that the problem my be, at least in part, related to the user language settings. We've settled on a new keystroke (CONTROL+SHIFT+ALT+0) and we're hoping that this one will be more relyable. That said, users will still need to check that the keystroke has been installed. There is actually a section in the known issues page on the site which talks about this problem. I can't remember the exact wording but its something like "issue: the navigation keys don't work and I keep hearing the same message". I'm adding a block of code as we speak which will test the plug-in and the connection between it and JAWS. This should help to identify the problem for users immediately. There have been a few people who got tripped up by this one. Dan Rugman Visit www.musicaccess.co.uk The new on-line resource for visually impaired musicians and home of Sibelius Access. -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Dave 'SqueezeBox' Carlson Sent: 01 October 2008 16:12 To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] Adding the Ctrl-` Keystroke Dan, I went through the process to add Ctrl-` to the Access Plug-in. However I saw that it was then one of two keystrokes, the other being Ctrl- That seems consistent because I added the Ctrl-` to the Plug-In. However I decided to also delete the seeming irrelevant Ctrl- keystroke before saving, and things seem to work just fine. Is this something we should do, in general, and so add the instruction to delete that Ctrl- keystroke, to the bug fixes? Dave If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx