Dear Expert, Hello, I am designing a high speed system.Since I don't know my driver's output resistance, thus the termination resistor value is not known. Thus may I use the variable resistor? If I use the variable resistor, the size is big thus I am unable to put all the resistor near the driver.( I have more than 10 outputs needs to be terminated). Which means the termination resistor could not be put close to the drivers. However, if I use a fixed and small size resistor, I need to trim the resistor manually when I doing the testing. So may I know that which one is more suitable? Thanks. -- Best Regards ================================== *Xiaoliang, Tan* * * ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu