Dear all, I am designing a new PCB boards which contains the Virtex-II pro XC2VP50-5FF1152C. I want to use 12 RocketIO Transceivers with speeds above 1Gb/s. These boards will be working in a heavy-ion detector under a magnetic field of ~5 Tesla. ^^^^^^^^ As discribed, in Xilinx user guide ug024 page 111, it is recommended the use of ferrite beads from Murata for the power filtering on each transceiver power pin. Since I have a magnetic field of ~5 Tesla I have some questions: 1- Is there any other way of designing these power filters without using ferrite/coils, and similar performance? 2- What are the risks that I will be taken if I don't place the ferrite? The RocketIOs will not work? 3- Any suggestions for overcome this issue? I have inquired Xilinx on this matter and I am waiting for their answer. What I am afraid is that their answer may include something like: We cannot guarantee anything that goes out of specs. Which doesn't help me. That is why I am contacting the list seeking for suggestions/advises. Thanks in advance, Rui Pimenta ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu