[SI-LIST] Re: cat 6 RJ45 jack for PCB
- From: "Mikhail Matusov" <matusov@xxxxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Fri, 23 Jun 2006 14:27:29 -0400
> Since this is an industrial machine application you may want to conceder
> using a better connector. After all, if there is a lot of vibration or
> if the environment is not office clean, the RJ45 may not be a good
> choice.
Phoenix Contact (www.phoenixcontact.ca) make industrial ruggedized RJ45
connectors.
=======================
Mikhail Matusov
Hardware Design Engineer
Square Peg Communications
Tel.: +1 (613) 271-0044 ext.231
Fax: +1 (613) 271-3007
http://www.squarepeg.ca
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
