[SI-LIST] Re: UltraCAD ESR and Bypass Capacitor Calculator
- From: "Peterson, James F (FL51)" <james.f.peterson@xxxxxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Tue, 5 Aug 2003 04:12:33 -0700
You can't forget PSPICE. No offense, but I've looked at your tool,
and PSPICE does a better job!
-----Original Message-----
From: Doug Brooks [mailto:doug@xxxxxxxxxx]
Sent: Monday, August 04, 2003 6:33 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: UltraCAD ESR and Bypass Capacitor Calculator
Perhaps I should have clarified my comment as follows!
1. The reason we wrote the calculator in the first place was because we
>couldn't figure out how to make the frequency response calculation for an
>arbitrary number of capacitors with arbitrary values, inductance and ESR
>any other way******** with the resources we had availale to us*********.
>Then we figured others might have the same problem and would
>like access to the same tool.
>(I did not mean to imply there weren't any other tools that could do this.
>And I apologize if that's the way it came across. Some of the other tools
>readily available, such as Excel and Mathcad, will do the job, but with so
>much overhead that for a large problem it takes forever to complete.)
>
Doug Brooks' new book, "Signal Integrity Issues and Printed Circuit Board
Design" has just been released by Prentice Hall. See details and ordering
info at www.ultracad.com
____________________________________________________________________________
__
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
