Guys, please handle the tool support issues off-line. Todd. Todd Westerhoff VP, Software Products Signal Integrity Software Inc. www.sisoft.com 6 Clock Tower Place Suite 250 Maynard, MA 01754 (978) 461-0449 x24 twesterh@xxxxxxxxxx I want to live like that -Sidewalk Prophets -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Bill Hargin (In-Circuit Design) Sent: Thursday, January 24, 2013 2:56 PM To: mfilion@xxxxxxxxxxxxxxx; mik.nazaryan@xxxxxxxxx; si-list@xxxxxxxxxxxxx Subject: [SI-LIST] Re: SI Sweep Simulation ? Hi Marc-Andre: <<The only annoying thing, it will sweep all possibilities. You cannot choose the one you really need. This can longer simulation time.>> In HyperLynx, if you double-click on the text of a sweep parameter (e.g., the name of a programmable buffer), a list of checkboxes will appear that will allow you to select specific options of interest. Bill Hargin In-Circuit Design, USA Software & SI Simulation for High-Speed PCB Design (425) 301-4425 b.hargin@xxxxxxxxxx Skype: bill.hargin Online: www.icd.com.au -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Marc-André Filion Sent: Thursday, January 24, 2013 8:29 AM To: mik.nazaryan@xxxxxxxxx; si-list@xxxxxxxxxxxxx Subject: [SI-LIST] Re: SI Sweep Simulation ? Hi Mik, I cannot speak for the other SW. But I know that hyperlynx can do sweep. I don't remember how far boardsim can go, but linesim can change almost all parameter. The only annoying thing, it will sweep all possibilities. You cannot choose the one you really need. This can longer simulation time. You might need a license for sweep simulation although. My best bet for you is to go with linesim if you have hyperlynx. Regards, Marc-André Filion, ing Concepteur Matériel / Hardware Designer Brioconcept Consulting Inc. 450.681.2779 x2368 -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Mik Nazaryan Sent: 24 janvier 2013 05:09 To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] SI Sweep Simulation ? Hi friends, I need some advice about SI simulation. I want to use sweep simulation (use different combinations of ODT and serial termination) and measures dozens parameters togetherin every single simulation. It is also important to control the input signal (voltage amplitude, noise amplitude, line coding etc.). Does anyone know is it possible to do in HyperLynx? At first I thought, export spice netlist from HyperLynx and use any spice simulator or even Matlab/Simulink to simulate and analyze a specified channel. But it is a bit difficult to do. Need to write simulation decks, test benches and measurement files. I'm not familiar with OrCad tool? What do you think is it possible to use OrCad SI tools in this case? Thank you. Best Regards, Mik Nazaryan ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu