[SI-LIST] Re: SI Sweep Simulation ?
- From: steve weir <weirsi@xxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Thu, 24 Jan 2013 03:06:43 -0800
SiSoft
Steve.
On 1/24/2013 2:08 AM, Mik Nazaryan wrote:
> Hi friends,
>
> I need some advice about SI simulation. I want to use sweep simulation
> (use different combinations of ODT and serial termination) and measures
> dozens parameters togetherin every single simulation. It is also
> important to control the input signal (voltage amplitude, noise
> amplitude, line coding etc.). Does anyone know is it possible to do in
> HyperLynx?
> At first I thought, export spice netlist from HyperLynx and use any
> spice simulator or even Matlab/Simulink to simulate and analyze a
> specified channel.
> But it is a bit difficult to do. Need to write simulation decks, test
> benches and measurement files.
> I'm not familiar with OrCad tool? What do you think is it possible to
> use OrCad SI tools in this case?
>
> Thank you.
> Best Regards,
> Mik Nazaryan
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List forum is accessible at:
> http://tech.groups.yahoo.com/group/si-list
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
>
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
--
Steve Weir
IPBLOX, LLC
1580 Grand Point Way
MS 34689
Reno, NV 89523-9998
www.ipblox.com
(775) 299-4236 Business
(866) 675-4630 Toll-free
(707) 780-1951 Fax
All contents Copyright (c)2012 IPBLOX, LLC. All Rights Reserved.
This e-mail may contain confidential material.
If you are not the intended recipient, please destroy all records
and notify the sender.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts: