Dear Experts,
I'm working on the optimization of a PCB for 50 to 70 frequency band... For
this frequency band , I'm expecting RL<-17dB.
My topology is DUT via - Coplanar line - via - microstrip - connector.
I did the simulation and get the 50 ohm +_5% for the whole path. But the RL is
very poor in 50-70 GHz band.
Please guide , how to improve the RL in that frequency band ???
Thanks
Suresh
Sent from my iPhone
On 29-Mar-2017, at 7:35 PM, Eric Bogatin <eric@xxxxxxxxxxxxxxx> wrote:------------------------------------------------------------------
Ever wonder just what is a Smith Chart and should I care? Check out my
latest blog on the SI Journal:
https://www.signalintegrityjournal.com/blogs/4-eric-bogatin-signal-integrity
-journal-editor/post/383-decoding-the-smith-chart-for-signal-integrity-engin
eers
--eric
*******************************************************
Dr. Eric Bogatin
Dean, <http://www.bethesignal.com/> Signal Integrity Academy
Editor, <https://www.signalintegrityjournal.com/> Signal Integrity Journal,
Adjunct Prof, ECEE Univ of Colorado, Boulder
Director, Teledyne LeCroy Front Range Signal Integrity Lab
105 S Sunset St, Suite J
Longmont, CO 80501 USA
Twitter @beTheSignal
e: <mailto:eric@xxxxxxxxxxxxxxx> eric@xxxxxxxxxxxxxxx
cell: 913-424-4333
<http://www.bethesignal.com/> www.beTheSignal.com
******************************************************
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu