Hi All , I'am trying to extract the PCB parasitics for RF Layout in the process of doing impedance matching for a critical circuitry.Freq :: 2- 6 Ghz. I have few queries as listed below in this regards .. For a loss'y transmission line the representation should be as RLGC. However , most of these extraction tools seem to be extracting merely L , C ( independent of frequency ) & R as frequency dependent skin effect.Should the di-electric related losses be considered as "G " ? Are there tools which extract the PCB parasitics directly in terms of RLGC ? I believe most of the PCB extraction tools are based on 2D field simulators. Hence , the extraction does not make sense when there is a split plane . Is the only option is to go for 3D EM simulators ? If we go for 3D EM simulators , will they be able to extract from the PCB gerbers directly ? Can you pls throw some light on the above issues including the relevant tools ? Thanks in Advance !! Regards Sunil ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu