Thanks Paul,
Output impedance is close to fast corner impedance.
Regards
Venkat
On Tue, Dec 3, 2019, 7:46 PM Taddonio, Paul <Paul.Taddonio@xxxxxxxxxxx>
wrote:
While we might expect a slower rise time at the slow corner, Is there
possibly a greater output impedance mismatch at the slow corner? -Paul
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On Behalf Of Venkat S
Sent: Tuesday, December 3, 2019 2:28 AM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Overshoot/undershoot is higher in Slow corner than fast
corner
Hi SI/PI experts,
I observed a strange behavior in my memory simulations.In Slow corner we
are seeing higher Overshoot and Undershoot than Fast Corner.
What could be the reason for this ?
It will be great if anyone could provide some ways to figure out this
issue.
Regards,
Venkat
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
