Try http://www.pcb123.com/ . I never used it for a real design, but it looked decent playing around with it. It seems to mostly be meant for designs from certain low volume PCB houses, but that is not necessarily a bad thing. Chris Christopher.Jakubiec@xxxxxxxxxxxx wrote: > Hello List, > > Can anyone recommend a low cost or freeware version of PCB layout editor > software? We would like to use this for some very basic 2 layer to 4 > layer prototype boards. I am currently reviewing the Eagle software > from CadSoft. > > Thanks, > > Chris Jakubiec > Infineon Technologies North America > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu